RRB Group D CBT · 27 Nov 2025 · Shift 2 — General Science
RRB Group D · previous year paper
45 General Science questions from RRB Group D CBT · 27 Nov 2025 · Shift 2, with answers and Hindi and English explanations.
1.
यदि किसी तार की लंबाई दोगुनी कर दी जाए और उसका अनुप्रस्थ काट क्षेत्रफल आधा कर दिया जाए, तो उसका प्रतिरोध _________ हो जाएगा।
If the length of a wire is doubled and its cross-sectional area is halved, its resistance will become _________.
- (A)मूल का एक-चौथाईone-fourth of the original
- (B)मूल का चार गुनाfour times the original
- (C)मूल का दोगुनाtwice the original
- (D)मूल का आधाhalf of the original
Show answer and explanation
Answer: (B)
मूल का चार गुना
four times the original
R = ρL/A। नया R = ρ(2L)/(A/2) = 4ρL/A = 4R। अतः प्रतिरोध मूल का चार गुना हो जाएगा।
R = ρL/A. New R = ρ(2L)/(A/2) = 4ρL/A = 4R. So resistance becomes four times the original.
2.
क्रि केट खिलाड़ी तेज गति से आती गेंद को पकड़ते समय अपने हाथों को पीछे की ओर क्यों खींच लेता है?
Why does a cricketer pull his hands back while catching a fast-moving ball?
- (A)संघट्ट का समय बढ़ाने के लिए ताकि हाथों पर लगने वाला बल कम हो जाएTo increase the time of impact so that the force on the hands is reduced
- (B)गेंद का त्वरण बढ़ाने के लिएTo increase the acceleration of the ball
- (C)गेंद का संवेग कम करने के लिएTo decrease the momentum of the ball
- (D)गेंद पर कार्यरत बल को बढ़ाने के लिएTo increase the force acting on the ball
Show answer and explanation
Answer: (A)
संघट्ट का समय बढ़ाने के लिए ताकि हाथों पर लगने वाला बल कम हो जाए
To increase the time of impact so that the force on the hands is reduced
बल = संवेग में परिवर्तन ÷ समय। हाथ पीछे खींचने से गेंद को रोकने का समय बढ़ जाता है, जिससे हाथों पर लगने वाला बल कम हो जाता है।
Force = change in momentum ÷ time. Pulling the hands back increases the time taken to stop the ball, so the force on the hands is reduced.
3.
एककोशिकीय जीव का समान आनुवंशिक सामग्री वाले दो बराबर संतति कोशिकाओं में विभाजन को निम्नलिखित में से क्या कहा जाता है?
What is the division of a unicellular organism into two equal daughter cells with the same genetic material called?
- (A)मुकुलनBudding
- (B)बीजाणु निर्माणSpore formation
- (C)बाइनरी विखंडनBinary fission
- (D)संयुग्मनConjugation
Show answer and explanation
Answer: (C)
बाइनरी विखंडन
Binary fission
द्विखंडन (जैसे अमीबा) में एक कोशिका समान आनुवंशिक पदार्थ वाली दो बराबर संतति कोशिकाओं में बँट जाती है। मुकुलन में असमान उभार बनता है।
In binary fission (e.g. Amoeba) a single cell divides into two equal daughter cells with identical genetic material. Budding gives an unequal outgrowth.
4.
निम्नलिखित में से किस कारक में वृद्धि से चालक का प्रतिरोध बढ़ेगा?
(i) चालक का तापमान
(ii) चालक की लंबाई
(iii) चालक के अनुप्रस्थ काट का क्षेत्रफल
Increase in which of the following factors will increase the resistance of a conductor?
(i) Temperature of the conductor
(ii) Length of the conductor
(iii) Area of cross-section of the conductor
- (A)(ii) और (iii) दोनोंBoth (ii) and (iii)
- (B)केवल (i)Only (i)
- (C)केवल (iii)Only (iii)
- (D)(i) और (ii) दोनोंBoth (i) and (ii)
Show answer and explanation
Answer: (D)
(i) और (ii) दोनों
Both (i) and (ii)
R = ρL/A, और धातु की प्रतिरोधकता ताप के साथ बढ़ती है। अतः ताप और लंबाई बढ़ने पर प्रतिरोध बढ़ता है, जबकि अनुप्रस्थ काट बढ़ने पर घटता है। अतः (i) और (ii) दोनों।
R = ρL/A, and ρ of a metal rises with temperature. So resistance increases with temperature and length, but decreases with a larger cross-section. So the answer is both (i) and (ii).
5.
निम्नलिखित में से कौन-सा पराश्रव्य ध्वनि (ultrasound) का अनुप्रयोग नहीं है?
Which of the following is NOT an application of ultrasound?
- (A)धातु के ब्लॉकों में दरारों का पता लगानाDetecting cracks in metal blocks
- (B)वस्तुओं की सफाई करनाCleaning the objects
- (C)चिकित्सीय इमेजिंगMedical imaging
- (D)नियमित श्रवण परीक्षणRegular hearing tests
Show answer and explanation
Answer: (D)
नियमित श्रवण परीक्षण
Regular hearing tests
पराश्रव्य ध्वनि का उपयोग धातुओं में दरारें खोजने, वस्तुओं की सफाई और चिकित्सा इमेजिंग में होता है। श्रवण जाँच में श्रव्य ध्वनि प्रयोग होती है, क्योंकि मनुष्य पराश्रव्य नहीं सुन सकता।
Ultrasound is used to detect cracks in metals, clean objects and for medical imaging. Hearing tests use audible sound, since humans cannot hear ultrasound.
6.
हाइड्रोक्लोरिक एसिड के साथ धातु सोडियम कार्बोनेट और सोडियम बाइकार्बोनेट की अभिक्रि या के बीच क्या समानता है?
What is the similarity between the reactions of sodium carbonate and sodium bicarbonate with hydrochloric acid?
- (A)कार्बन मोनोऑक्साइड मुक्त होता हैCarbon monoxide is released
- (B)हाइड्रोजन गैस मुक्त होती हैHydrogen gas is released
- (C)हाइड्रोजन कार्बोनेट बनता है।Hydrogen carbonate is formed.
- (D)सोडियम क्लोराइड बनता है।Sodium chloride is formed.
Show answer and explanation
Answer: (D)
सोडियम क्लोराइड बनता है।
Sodium chloride is formed.
दोनों HCl से अभिक्रिया कर सोडियम क्लोराइड, जल और CO₂ देते हैं: Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂ तथा NaHCO₃ + HCl → NaCl + H₂O + CO₂।
Both react with HCl to give sodium chloride, water and CO₂: Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂ and NaHCO₃ + HCl → NaCl + H₂O + CO₂.
7.
न्यू कार्टेशि यन साइन कन्वेंशन (New Cartesian Sign Convention) के अनुसार, यदि प्रकाश की किरण वस्तु से लेंस तक जाती है, तो वस्तु हमेशा इस प्रकार रखी जाती है कि ................।
According to the New Cartesian Sign Convention, if a ray of light travels from the object to the lens, the object is always placed such that ................
- (A)प्रकाश लेंस पर दाईं ओर से पड़ेlight falls on the lens from the right side
- (B)वस्तु लेंस के बाईं ओर होthe object is to the left of the lens
- (C)वस्तु हमेशा मुख्य अक्ष के ऊपर होthe object is always above the principal axis
- (D)वस्तु की दूरी (u) सदैव धनात्मक होthe object distance (u) is always positive
Show answer and explanation
Answer: (B)
वस्तु लेंस के बाईं ओर हो
the object is to the left of the lens
नई कार्तीय चिह्न परिपाटी में बिंब को सदैव लेंस के बाईं ओर रखा जाता है, जिससे प्रकाश बाईं ओर से आता है और u ऋणात्मक होता है।
In the New Cartesian Sign Convention, the object is always placed to the left of the lens, so light falls on it from the left and u is negative.
8.
मई 2025 में, छह अफ्रीकी देशों ने कालाजार (Kala Azar) से निपटने के लिए विश्व स्वास्थ्य संगठन (WHO) के साथ एक समझौता ज्ञापन (MoU) पर हस्ताक्षर किए। कालाजार (Kala Azar) किसे संदर्भित करता है?
In May 2025, six African nations signed a Memorandum of Understanding (MoU) with the World Health Organization (WHO) to combat Kala Azar. What does Kala Azar refer to?
- (A)दूषित जल के माध्यम से फैलने वाला जीवाणु संक्रमणA bacterial infection spread through contaminated water
- (B)लाल रक्त कोशिकाओं को प्रभावित करने वाला आनुवंशिक विकारA genetic disorder affecting red blood cells
- (C)मच्छरों द्वारा संचारित एक प्रकार का विषाणुजनित बुखारA type of viral fever transmitted by mosquitoes
- (D)सैंडफ्लाई (बालू मक्खी) के काटने से होने वाला परजीवी रोगA parasitic disease caused by sandfly bites
Show answer and explanation
Answer: (D)
सैंडफ्लाई (बालू मक्खी) के काटने से होने वाला परजीवी रोग
A parasitic disease caused by sandfly bites
काला-अज़ार (विसरल लीशमैनियासिस) लीशमैनिया नामक प्रोटोज़ोआ परजीवी से होता है और संक्रमित बालू मक्खी (सैंडफ्लाई) के काटने से फैलता है।
Kala Azar (visceral leishmaniasis) is caused by the protozoan parasite Leishmania and is spread by the bite of infected sandflies.
9.
जंतुओं के संयोजी ऊतकों में, वसा कोशिकाएं लोब्यूल्स में व्यवस्थित होती हैं, जो ________________के विभाजन द्वारा पृथक होती हैं।
In the connective tissues of animals, fat cells are arranged in lobules, which are separated by partitions of ________________.
- (A)कोलैजन और इलास्टि न तंतु (collagen and elastin fibres)collagen and elastin fibres
- (B)पीत तंतु और लसीका (yellow fibres and lymph)yellow fibres and lymph
- (C)कंकाल तंतु और कंडरा (skeletal fibres and tendons)skeletal fibres and tendons
- (D)रेटिकुलर तंतु और प्लाज्मा (reticular fibres and plasma)reticular fibres and plasma
Show answer and explanation
Answer: (A)
कोलैजन और इलास्टि न तंतु (collagen and elastin fibres)
collagen and elastin fibres
वसा ऊतक में वसा कोशिकाएँ पालियाँ (लोब्यूल) बनाती हैं, जो संयोजी ऊतक के तंतुओं, मुख्यतः कोलेजन और इलास्टिन तंतुओं के विभाजकों से अलग रहती हैं।
In adipose (fat) tissue, fat cells form lobules separated by partitions of connective tissue fibres, mainly collagen and elastin fibres.
10.
धातुओं का संक्षारण एक ऐसी प्रक्रिया है, जिसमें:
Corrosion of metals is a process in which:
- (A)धातुएं स्थायी रूप से अपना रंग बदल लेती हैंmetals change their colour permanently
- (B)धातुएं पर्यावरणीय कारकों के साथ अभिक्रिया करके अपने ऑक्साइड, सल्फाइड या कार्बोनेट में परिवर्तित हो जाती हैंmetals are converted to their oxide, sulphide or carbonate by reaction with environmental agents
- (C)धातुएं कम तापमान पर पिघल जाती हैंmetals melt at low temperature
- (D)अम्लों के साथ अभिक्रिया के कारण धातुओं का भार बढ़ जाता हैmetals gain weight due to reaction with acids
Show answer and explanation
Answer: (B)
धातुएं पर्यावरणीय कारकों के साथ अभिक्रिया करके अपने ऑक्साइड, सल्फाइड या कार्बोनेट में परिवर्तित हो जाती हैं
metals are converted to their oxide, sulphide or carbonate by reaction with environmental agents
संक्षारण वह प्रक्रिया है जिसमें नमी, वायु आदि के प्रभाव से धातु धीरे-धीरे अपने ऑक्साइड, सल्फाइड या कार्बोनेट में बदल जाती है, जैसे लोहे पर जंग लगना।
Corrosion is the slow conversion of a metal into its oxide, sulphide or carbonate by moisture, air and other agents, e.g. rusting of iron.
11.
सांद्र सल्फ्यूरिक अम्ल को निर्जलीकरण कारक माना जा सकता है क्योंकि यह निम्नलिखित में से किससे जल को हटाता है?
Concentrated sulphuric acid can be regarded as a dehydrating agent because it removes water from which of the following?
- (A)सोडियम हाइड्रॉक्साइडSodium hydroxide
- (B)अमोनिया गैसAmmonia gas
- (C)प्रोपेनPropane
- (D)ग्लूकोजGlucose
Show answer and explanation
Answer: (D)
ग्लूकोज
Glucose
सांद्र H₂SO₄ ग्लूकोज (C₆H₁₂O₆) से जल के तत्व निकाल लेता है और काला कार्बन शेष रहता है, इसलिए यह निर्जलीकारक है।
Concentrated H₂SO₄ removes the elements of water from glucose (C₆H₁₂O₆), leaving black carbon, so it acts as a dehydrating agent.
12.
निम्नलिखित में से कौन-सा, वंशागति के संबंध में मेंडल के निष्कर्ष को सही रूप से दर्शाता है?
Which one of the following correctly represents Mendel's conclusion about inheritance?
- (A)प्रत्येक लक्षण दो कारकों द्वारा नियंत्रित होता है।Each trait is controlled by two factors.
- (B)प्रत्येक लक्षण एक कारक द्वारा नियंत्रित होता है।Each traits is controlled by one factor.
- (C)प्रत्येक लक्षण एक गुणसूत्र द्वारा नियंत्रित होता है।Each trait is controlled by one chromosome.
- (D)प्रत्येक लक्षण तीन जीनों द्वारा नियंत्रित होता है।Each trait is controlled by three genes.
Show answer and explanation
Answer: (A)
प्रत्येक लक्षण दो कारकों द्वारा नियंत्रित होता है।
Each trait is controlled by two factors.
मेंडल ने निष्कर्ष निकाला कि प्रत्येक लक्षण दो कारकों (अब एलील) द्वारा नियंत्रित होता है, जिनमें से एक-एक प्रत्येक जनक से आता है।
Mendel concluded that each trait is controlled by a pair of factors (now called alleles), one inherited from each parent.
13.
अयस्क से अपअयस्क (gangue) को हटाने के लिए उपयोग की जाने वाली प्रक्रि याएं, अपअयस्क और अयस्क के किन गुणों के बीच अंतर पर आधारित हैं?
The processes used to remove gangue from the ore are based on the differences between which properties of the gangue and the ore?
- (A)केवल भौतिकPhysical only
- (B)रासायनिक या भौतिकChemical or physical
- (C)केवल रासायनिकChemical only
- (D)अपवर्तनांक (Refrative index)Refractive index
Show answer and explanation
Answer: (B)
रासायनिक या भौतिक
Chemical or physical
गैंग को हटाने की विधियाँ गैंग और अयस्क के भौतिक या रासायनिक गुणों के अंतर पर आधारित होती हैं (जैसे फेन प्लवन, चुंबकीय पृथक्करण, निक्षालन)।
Gangue is removed by methods based on differences in the physical or chemical properties of the gangue and the ore (e.g. froth flotation, magnetic separation, leaching).
14.
नई कार्तीय चिह्न परिपाटी (New Cartesian Sign Convention) के अनुसार, यदि प्रकाश की किरण वस्तु से लेंस की ओर यात्रा करती है, तो वस्तु को हमेशा इस प्रकार रखा जाता है कि:
According to the New Cartesian Sign Convention, if a light ray travels from the object to the lens, the object is always placed such that:
- (A)वस्तु की दूरी (u) हमेशा धनात्मक होती हैThe object distance (u) is always positive
- (B)वस्तु को लेंस के बाईं ओर रखा जाता हैThe object is placed to the left of the lens
- (C)वस्तु को हमेशा मुख्य अक्ष के ऊपर रखा जाता हैThe object is always placed above the principal axis
- (D)प्रकाश लेंस पर दाईं ओर से पड़ता हैThe light falls on the lens from the right-hand side
Show answer and explanation
Answer: (B)
वस्तु को लेंस के बाईं ओर रखा जाता है
The object is placed to the left of the lens
नई कार्तीय चिह्न परिपाटी में प्रकाश बाएँ से दाएँ आता माना जाता है, इसलिए वस्तु सदैव लेंस के बाईं ओर रखी जाती है (u ऋणात्मक होता है)।
In the New Cartesian Sign Convention, light is taken to fall from left to right, so the object is always placed to the left of the lens (u is negative).
15.
निम्नलिखित में से कौन-सा, वंशागति के संबंध में मेन्डल के निष्कर्ष को सही रूप से दर्शाता है?
Which one of the following correctly represents Mendel's conclusion about inheritance?
- (A)प्रत्येक विशेषक तीन जीनों द्वारा नियंत्रित होते है।Each trait is controlled by three genes.
- (B)प्रत्येक विशेषक एक गुणसूत्र द्वारा नियंत्रित होते है।Each trait is controlled by one chromosome.
- (C)प्रत्येक विशेषक दो कारकों द्वारा नियंत्रित होते है।Each trait is controlled by two factors.
- (D)प्रत्येक विशेषक एक कारक द्वारा नियंत्रित होते है।Each trait is controlled by one factor.
Show answer and explanation
Answer: (C)
प्रत्येक विशेषक दो कारकों द्वारा नियंत्रित होते है।
Each trait is controlled by two factors.
मेंडल ने निष्कर्ष निकाला कि प्रत्येक लक्षण दो कारकों (अब एलील) द्वारा नियंत्रित होता है, जिनमें से एक-एक प्रत्येक जनक से आता है।
Mendel concluded that each trait is controlled by a pair of factors (now called alleles), one inherited from each parent.
16.
कार्बन का वह विशिष्ट लक्षण क्या है, जो इसके अधिक संख्या में कार्बनिक यौगिकों के निर्माण का कारण बनता है?
What is the specific characteristic of carbon that leads to the formation of a large number of organic compounds?
- (A)केवल चतुःसंयोजकताTetravalency only
- (B)केवल श्रृंखलनCatenation only
- (C)विलेयताSolubility
- (D)चतुःसंयोजकता (tetravalency) और श्रृंखलन दोनोंBoth tetravalency and catenation
Show answer and explanation
Answer: (D)
चतुःसंयोजकता (tetravalency) और श्रृंखलन दोनों
Both tetravalency and catenation
कार्बन बहुत अधिक यौगिक श्रृंखलन (अन्य कार्बन परमाणुओं से जुड़कर श्रृंखला व वलय बनाना) और चतुःसंयोजकता (चार बंध) दोनों के कारण बनाता है।
Carbon forms a huge number of compounds because of catenation (bonding with other carbon atoms into chains and rings) together with tetravalency (four bonds per atom).
17.
निम्नलिखित में से कौन-सा अल्ट्रासाउंड का अनुप्रयोग नहीं है?
Which of the following is NOT an application of ultrasound?
- (A)नियमित श्रवण परीक्षणRoutine hearing test
- (B)धातु ब्लॉकों में दरारों का पता लगानाDetecting cracks in metal blocks
- (C)वस्तुओं की सफाईCleaning of objects
- (D)मेडिकल इमेजिंगMedical imaging
Show answer and explanation
Answer: (A)
नियमित श्रवण परीक्षण
Routine hearing test
पराश्रव्य ध्वनि का उपयोग धातुओं में दरार खोजने, कठिन भागों की सफाई और चिकित्सा प्रतिबिंबन में होता है। सामान्य श्रवण परीक्षण में श्रव्य ध्वनि प्रयोग होती है, पराश्रव्य नहीं।
Ultrasound is used for detecting flaws in metals, cleaning hard-to-reach parts and medical imaging. A routine hearing test uses audible sound, not ultrasound.
18.
किसी जीव में कोशिका भित्ति की अवस्थिति कहाँ होती है?
What is the location of the cell wall in an organism?
- (A)जंतु कोशिका में प्लाज्मा झिल्ली के ठीक अंदरJust inside the plasma membrane in an animal cell
- (B)पादप कोशिका में प्लाज्मा झिल्ली के ठीक अंदरJust inside the plasma membrane in a plant cell
- (C)पादप कोशिका में प्लाज्मा झिल्ली के ठीक बाहरJust outside the plasma membrane in a plant cell
- (D)जंतु कोशिका में प्लाज्मा झिल्ली के ठीक बाहरJust outside the plasma membrane in an animal cell
Show answer and explanation
Answer: (C)
पादप कोशिका में प्लाज्मा झिल्ली के ठीक बाहर
Just outside the plasma membrane in a plant cell
कोशिका भित्ति पादप कोशिका में होती है और प्लाज़्मा झिल्ली के ठीक बाहर स्थित होती है। जंतु कोशिका में कोशिका भित्ति नहीं होती।
The cell wall is found in plant cells and lies just outside the plasma membrane. Animal cells have no cell wall.
19.
उत्तल लेंस को अभिसारी लेंस भी कहा जाता है क्योंकि:
A convex lens is also called a converging lens because:
- (A)यह प्रकाश की किरणों को बिल्कुल भी नहीं मोड़ताit does not bend light rays at all
- (B)यह प्रकाश की किरणों को एक-दूसरे से दूर अपसारित करता हैit diverges rays of light away from each other
- (C)यह हमेशा आभासी प्रतिबिंब बनाता हैit always forms virtual images
- (D)यह समानांतर किरणों को एक बिंदु पर फोकस (केंद्रित) करता हैit brings parallel rays to a focus at a point
Show answer and explanation
Answer: (D)
यह समानांतर किरणों को एक बिंदु पर फोकस (केंद्रित) करता है
it brings parallel rays to a focus at a point
उत्तल लेंस समांतर किरणों को अंदर की ओर मोड़कर मुख्य फोकस पर मिला देता है, इसलिए इसे अभिसारी लेंस कहते हैं।
A convex lens bends parallel rays inward so that they meet at its principal focus; hence it is called a converging lens.
20.
मटर का पौधा अन्य पौधों पर चढ़ने के लिए किस संरचना का उपयोग करता है?
Which structure does the pea plant use to climb on other plants?
- (A)प्ररोह (Shoot)Shoot
- (B)प्रवाहक (Runner)Runner
- (C)चूसक (Sucker)Sucker
- (D)प्रतान (Tendrils)Tendrils
Show answer and explanation
Answer: (D)
प्रतान (Tendrils)
Tendrils
मटर का तना कमज़ोर होता है और वह प्रतानों (टेंड्रिल) की सहायता से चढ़ता है, जो सहारे के चारों ओर लिपट जाते हैं।
The pea plant has weak stems and climbs using tendrils, thin coiling structures (modified leaflets) that wind around supports.
21.
फसलों के लिए जल की उपलब्धता में सुधार हेतु सिंचाई में नई पहलों के अंतर्गत निम्नलिखित में से कौन-सी विधि शामिल है?
Which of the following methods is part of the fresh initiatives in irrigation to improve water availability for crops?
- (A)ड्रिप सिंचाई और फसल चक्रणDrip irrigation and crop rotation
- (B)खाद डालना और रासायनिक छिड़कावManuring and chemical spraying
- (C)वर्षा जल संचयन और जलसंभर प्रबंधनRainwater harvesting and watershed management
- (D)छिड़काव (स्प्रिंकलर) सिंचाई और जुताईSprinkler irrigation and ploughing
Show answer and explanation
Answer: (C)
वर्षा जल संचयन और जलसंभर प्रबंधन
Rainwater harvesting and watershed management
कृषि हेतु जल की उपलब्धता बढ़ाने के नए प्रयासों में वर्षा जल संचयन और जलसंभर (वाटरशेड) प्रबंधन शामिल हैं, जैसे चेक-डैम बनाकर भूजल बढ़ाना।
Fresh initiatives to increase water available for agriculture include rainwater harvesting and watershed management (building check-dams to raise groundwater).
22.
एककोशिकीय जीव का समान आनुवंशिक पदार्थ वाली दो समान संतति कोशिकाओं में विभाजित होना निम्नलिखित में से क्या कहलाता है?
The splitting of a unicellular organism into two equal daughter cells containing identical genetic material is termed as which of the following?
- (A)द्विविखंडन (Binary fission)Binary fission
- (B)संयुग्मन (Conjugation)Conjugation
- (C)बीजाणु निर्माण (Spore formation)Spore formation
- (D)मुकुलन (Budding)Budding
Show answer and explanation
Answer: (A)
द्विविखंडन (Binary fission)
Binary fission
द्विखंडन में एककोशिकीय जीव (जैसे अमीबा) दो समान संतति कोशिकाओं में बँटता है जिनमें समान आनुवंशिक पदार्थ होता है। मुकुलन में असमान उभार बनता है।
In binary fission a unicellular organism (e.g. Amoeba) divides into two equal daughter cells with identical genetic material. Budding gives an unequal outgrowth.
23.
जीवों में लैंगिक जनन के संबंध में सही विशेषता का चयन कीजिए।
Select the correct feature of sexual reproduction in organisms.
- (A)यह जनक के बिल्कुल समान संतति उत्पन्न करता है।It produces offspring exactly similar to the parent.
- (B)यह बड़ी संख्या में संतति उत्पन्न करता है।It produces a large number of offspring.
- (C)यह केवल एक जनक का ही DNA संतति में पारित करता है।It passes the DNA of only one parent to the offspring.
- (D)यह संतति में दो माता-पिता के DNA को संयुक्त करता है।It combines the DNA of two parents in the offspring.
Show answer and explanation
Answer: (D)
यह संतति में दो माता-पिता के DNA को संयुक्त करता है।
It combines the DNA of two parents in the offspring.
लैंगिक जनन में दो जनकों के युग्मकों का संलयन होता है, अतः संतति को दोनों का DNA मिलता है और विविधता उत्पन्न होती है।
Sexual reproduction involves fusion of gametes from two parents, so the offspring get a combination of DNA from both, creating variation.
24.
निम्नलिखित में से कौन-सा पदार्थ के मापनीय गुण का उसके SI मात्रक के साथ सही मिलान करता है?
Which of the following correctly matches a measurable property of matter with its SI unit?
- (A)दाब – न्यूटनPressure – Newton
- (B)आयतन – घन सेंटीमीटरVolume – Cubic centimetre
- (C)घनत्व – किलोग्राम प्रति घन मीटरDensity – Kilogram per cubic metre
- (D)तापमान – कैलोरीTemperature – Calorie
Show answer and explanation
Answer: (C)
घनत्व – किलोग्राम प्रति घन मीटर
Density – Kilogram per cubic metre
घनत्व का SI मात्रक किलोग्राम प्रति घन मीटर (kg/m³) है। दाब का पास्कल, आयतन का घन मीटर और ताप का केल्विन है।
The SI unit of density is kilogram per cubic metre (kg/m³). Pressure is in pascal, volume in cubic metre, temperature in kelvin.
25.
एक भारी लकड़ी के गुटके को खुरदरे फर्श पर धकेला जाता है। लगाया गया बल धीरे-धीरे बढ़ाया जाता है: पहले, गुटका नहीं हिलता है। फिर, एक निश्चित बल पर, गुटका केवल फिसलना शुरू करता है। अंत में, जब गुटका फिसल रहा होता है, तो वह नियत वेग से गति करता है। इन तीन चरणों में बल की स्थिति का सही वर्णन निम्नलिखित में से कौन-सा करता है?
A heavy wooden block is pushed across a rough floor. The applied force is gradually increased: At first, the block does not move. Then, at a certain force, the block just begins to slide. Finally, when the block is sliding, it moves with constant velocity. Which of the following correctly describes the force situation in these three stages?
- (A)चरण 1 – संतुलित, चरण 2 – असंतुलित, चरण 3 – संतुलितStage 1 – Balanced, Stage 2 – Unbalanced, Stage 3 – Balanced
- (B)चरण 1 – असंतुलित, चरण 2 – संतुलित, चरण 3 – संतुलितStage 1 – Unbalanced, Stage 2 – Balanced, Stage 3 – Balanced
- (C)चरण 1 – असंतुलित, चरण 2 – असंतुलित, चरण 3 – संतुलितStage 1 – Unbalanced, Stage 2 – Unbalanced, Stage 3 – Balanced
- (D)चरण 1 – संतुलित, चरण 2 – संतुलित, चरण 3 – असंतुलितStage 1 – Balanced, Stage 2 – Balanced, Stage 3 – Unbalanced
Show answer and explanation
Answer: (A)
चरण 1 – संतुलित, चरण 2 – असंतुलित, चरण 3 – संतुलित
Stage 1 – Balanced, Stage 2 – Unbalanced, Stage 3 – Balanced
विराम में स्थैतिक घर्षण धक्के को संतुलित करता है (संतुलित)। खिसकना शुरू होने पर बल घर्षण से अधिक होता है (असंतुलित)। एकसमान वेग पर नेट बल शून्य (संतुलित)।
At rest, static friction cancels the push (balanced). When it starts to slide, the force exceeds friction and it accelerates (unbalanced). At constant velocity net force is zero (balanced).
26.
जीवों में लैंगिक जनन के संबंध में सही विशेषता का चयन कीजिए।
Select the correct feature about sexual reproduction in organisms.
- (A)यह संतति में दो जनकों के DNA को संयुक्त करता है।It combines the DNA of two parents in the offspring.
- (B)यह केवल एक जनक का ही DNA संतति में पारित करता है।It passes the DNA of only one parent to the offspring.
- (C)यह बड़ी संख्या में संतति उत्पन्न करता है।It produces a large number of offspring.
- (D)यह जनक के बिल्कुल समान संतति उत्पन्न करता है।It produces offspring exactly similar to the parent(s).
Show answer and explanation
Answer: (A)
यह संतति में दो जनकों के DNA को संयुक्त करता है।
It combines the DNA of two parents in the offspring.
लैंगिक जनन में दो जनकों के युग्मकों का संलयन होता है, अतः संतति को दोनों का DNA मिलता है और विविधता उत्पन्न होती है।
Sexual reproduction involves fusion of gametes from two parents, so the offspring get a combination of DNA from both, creating variation.
27.
कार्बन का वह विशिष्ट लक्षण/लक्षण क्या है/हैं, जो इसके अधिक संख्या में कार्बनिक यौगिकों के निर्माण का कारण बनता है/बनते हैं?
The characteristic feature(s) of carbon, that lead to the formation of its large number of organic compounds is:
- (A)चतुःसंयोजकता (tetravalency) और श्रृंखलन (catenation) दोनोंboth tetravalency and catenation
- (B)विलेयताsolubility
- (C)केवल चतुःसंयोजकताonly tetravalency
- (D)केवल श्रृंखलनonly catenation
Show answer and explanation
Answer: (A)
चतुःसंयोजकता (tetravalency) और श्रृंखलन (catenation) दोनों
both tetravalency and catenation
कार्बन बहुत अधिक यौगिक श्रृंखलन (अन्य कार्बन परमाणुओं से जुड़कर श्रृंखला व वलय बनाना) और चतुःसंयोजकता (चार बंध) दोनों के कारण बनाता है।
Carbon forms a huge number of compounds because of catenation (bonding with other carbon atoms into chains and rings) together with tetravalency (four bonds per atom).
28.
CSIR-कोशिकीय एवं आणविक जीवविज्ञान केंद्र (CCMB) द्वारा 2025 में विकसित स्वदेशी mRNA वैक्सीन प्रौद्योगिकी का निम्नलिखित में से किस पर महत्वपूर्ण प्रभाव हो सकता है?
The indigenous mRNA vaccine technology developed by CSIR-Centre for Cellular and Molecular Biology (CCMB) in 2025 could have a significant impact on:
- (A)भविष्य के प्रकोपों के लिए तेज़, अधिक मापनीय वैक्सीन विकास प्रक्रिया प्रदान करनाproviding faster, more scalable vaccine development process for future outbreaks
- (B)डेंगू वेक्टर नियंत्रण रणनीतियों में सुधारimproving dengue vector control strategies
- (C)एंटीबायोटिक दवाओं के माध्यम से चिकनगुनिया के प्रसार को सीमित करनाlimiting the spread of chikungunya through antibiotics
- (D)आवश्यक वेक्टर नियंत्रण कार्यक्रमों की संख्या को कम करनाreducing the number of vector control programmes required
Show answer and explanation
Answer: (A)
भविष्य के प्रकोपों के लिए तेज़, अधिक मापनीय वैक्सीन विकास प्रक्रिया प्रदान करना
providing faster, more scalable vaccine development process for future outbreaks
mRNA प्लेटफ़ॉर्म को नए रोगाणु के लिए शीघ्र बदला जा सकता है, अतः CCMB की स्वदेशी mRNA तकनीक भविष्य की महामारियों के लिए तेज़ और बड़े पैमाने पर टीका विकास संभव बनाती है।
mRNA platforms can be redesigned quickly for a new pathogen, so CCMB's indigenous mRNA technology allows faster, scalable vaccine development for future outbreaks.
29.
एक पौधे को उखाड़कर धूप में छोड़ दिया गया। कुछ घंटों बाद, पौधा मुरझाया हुआ और कमज़ोर दिख रहा था। इसका सबसे संभावित कारण क्या हो सकता है?
A plant was uprooted and left in the sun. After a few hours, the plant looked wilted and weak. What could be the most probable reason for this?
- (A)जाइलम के माध्यम से भोजन स्थानांतरण अवरुद्ध हो गयाTransport of food through the xylem was blocked
- (B)जाइलम के माध्यम से जल चालन प्रारंभ हो गयाConduction of water through the xylem started
- (C)फ्लोएम के माध्यम से भोजन स्थानांतरण प्रारंभ हो गयाTransport of food through the phloem started
- (D)जाइलम के माध्यम से जल चालन अवरुद्ध हो गयाConduction of water through the xylem was blocked
Show answer and explanation
Answer: (D)
जाइलम के माध्यम से जल चालन अवरुद्ध हो गया
Conduction of water through the xylem was blocked
उखाड़ने पर जड़ें जल अवशोषित नहीं कर पातीं, अतः जाइलम द्वारा जल का संवहन रुक जाता है जबकि वाष्पोत्सर्जन चलता रहता है, और पौधा मुरझा जाता है।
Once uprooted, the roots cannot absorb water, so conduction of water through the xylem stops while transpiration continues, and the plant wilts.
30.
धातु सोडियम कार्बोनेट और सोडियम बाइकार्बोनेट की हाइड्रोक्लोरिक अम्ल के साथ अभिक्रिया में क्या समान है?
What is common between the reaction of metal sodium carbonate and sodium bicarbonate with hydrochloric acid?
- (A)हाइड्रोजन कार्बोनेट बनता हैHydrogen carbonate is formed
- (B)सोडियम क्लोराइड बनता हैSodium chloride is formed
- (C)हाइड्रोजन गैस निकलती हैHydrogen gas is released
- (D)कार्बन मोनोऑक्साइड निकलती हैCarbon monoxide is released
Show answer and explanation
Answer: (B)
सोडियम क्लोराइड बनता है
Sodium chloride is formed
Na₂CO₃ और NaHCO₃ दोनों HCl से अभिक्रिया कर सोडियम क्लोराइड, जल और कार्बन डाइऑक्साइड बनाते हैं। अतः दोनों में सोडियम क्लोराइड बनता है।
Both Na₂CO₃ and NaHCO₃ react with HCl to give sodium chloride, water and carbon dioxide. So sodium chloride is formed in both.
31.
मटर का पौधा अन्य पौधों पर चढ़ने के लिए किस संरचना का उपयोग करता है?
Which structure is used by pea plant to climb up other plants?
- (A)चूसक (Sucker)Sucker
- (B)प्ररोह (Shoot)Shoot
- (C)प्रवाहक (Runner)Runner
- (D)प्रतान (Tendrils)Tendrils
Show answer and explanation
Answer: (D)
प्रतान (Tendrils)
Tendrils
मटर का तना कमज़ोर होता है और वह प्रतानों (टेंड्रिल) की सहायता से चढ़ता है, जो सहारे के चारों ओर लिपट जाते हैं।
The pea plant has weak stems and climbs using tendrils, thin coiling structures (modified leaflets) that wind around supports.
32.
एक वस्तु को 78.4 m की ऊंचाई से गिराया जाता है। भूतल तक पहुँचने में उसके द्वारा लिया गया समय ज्ञात कीजिए। (g = 9.8 m/s² का उपयोग कीजिए)
An object is dropped from a height of 78.4 m. What is the time taken to reach the ground? (Use g = 9.8 m/s²)
- (A)5 s
- (B)6 s
- (C)2 s
- (D)4 s
Show answer and explanation
Answer: (D)
4 s
विराम से मुक्त पतन: h = ½gt²। 78.4 = ½ × 9.8 × t² → t² = 16 → t = 4। अतः उत्तर 4 s है।
Free fall from rest: h = ½gt². 78.4 = ½ × 9.8 × t² → t² = 16 → t = 4. So the answer is 4 s.
33.
एक वस्तु को 78.4 m की ऊंचाई से गिराया जाता है। भूतल तक पहुँचने में उसके द्वारा लिया गया समय ज्ञात कीजिए। (g = 9.8 m/s² का उपयोग कीजिए)
An object is dropped from a height of 78.4 m. Find the time taken by it to reach the ground. (Use g = 9.8 m/s²)
- (A)5 s
- (B)6 s
- (C)2 s
- (D)4 s
Show answer and explanation
Answer: (D)
4 s
विराम से मुक्त पतन: h = ½gt²। 78.4 = ½ × 9.8 × t² → t² = 16 → t = 4। अतः उत्तर 4 s है।
Free fall from rest: h = ½gt². 78.4 = ½ × 9.8 × t² → t² = 16 → t = 4. So the answer is 4 s.
34.
निम्नलिखित में से कौन-सा, गैस पर दाब बढ़ाने का परिणाम है?
Which of the following is the result of increasing the pressure on a gas?
- (A)गैस का वाष्पनEvaporation of the gas
- (B)गतिज ऊर्जा में वृद्धिIncrease in kinetic energy
- (C)अंतःकण स्थान में वृद्धिIncrease in interparticle space
- (D)अंतःकण स्थान में कमीDecrease in interparticle space
Show answer and explanation
Answer: (D)
अंतःकण स्थान में कमी
Decrease in interparticle space
दाब बढ़ाने पर गैस संपीडित होती है और उसके कण पास-पास आ जाते हैं, अतः कणों के बीच का स्थान घटता है।
Increasing pressure compresses a gas, pushing its particles closer together, so the interparticle space decreases.
35.
एक भारी लकड़ी के गुटके को किसी खुरदरे फर्श पर धकेला जाता है। लगाया गया बल धीरे-धीरे बढ़ाया जाता है।
1. पहले तो ब्लॉक हिलता नहीं है।
2. फिर, एक निश्चित बल पर, ब्लॉक फिसलना शुरू कर देता है। 3.अंततः , जब ब्लॉक फिसल रहा होता है, तो वह स्थिर वेग से चलता है। निम्नलिखित में से कौन सा कथन इन तीन चरणों में बल की स्थिति का सही वर्णन करता है?
A heavy wooden block is pushed across a rough floor. The applied force is gradually increased.
1. At first, the block does not move.
2. Then, at a certain force, the block begins to slide. 3. Finally, when the block is sliding, it moves with constant velocity. Which of the following statements correctly describes the force situation in these three stages?
- (A)चरण 1-संतुलित, चरण 2-संतुलित, चरण 3-असंतुलितStage 1 - Balanced, Stage 2 - Balanced, Stage 3 - Unbalanced
- (B)चरण 1-संतुलित, चरण 2-असंतुलित, चरण 3-संतुलितStage 1 - Balanced, Stage 2 - Unbalanced, Stage 3 - Balanced
- (C)चरण 1-असंतुलित, चरण 2-संतुलित, चरण 3-संतुलितStage 1 - Unbalanced, Stage 2 - Balanced, Stage 3 - Balanced
- (D)चरण 1-असंतुलित, चरण 2-असंतुलित, चरण 3-संतुलितStage 1 - Unbalanced, Stage 2 - Unbalanced, Stage 3 - Balanced
Show answer and explanation
Answer: (B)
चरण 1-संतुलित, चरण 2-असंतुलित, चरण 3-संतुलित
Stage 1 - Balanced, Stage 2 - Unbalanced, Stage 3 - Balanced
विराम में स्थैतिक घर्षण धक्के को संतुलित करता है (संतुलित)। खिसकना शुरू होने पर बल घर्षण से अधिक होता है (असंतुलित)। एकसमान वेग पर नेट बल शून्य (संतुलित)।
At rest, static friction cancels the push (balanced). When it starts to slide, the force exceeds friction and it accelerates (unbalanced). At constant velocity net force is zero (balanced).
36.
आंतरिक विस्थापन निगरानी केंद्र की रिपोर्ट के अनुसार, 2015 से 2024 के बीच भारत में आपदाओं के कारण कितने आंतरिक विस्थापन दर्ज किए गए?
According to the Internal Displacement Monitoring Centre report, how many internal displacements due to disasters were recorded in India between 2015 and 2024?
- (A)50 मिलियन50 million
- (B)10 मिलियन10 million
- (C)25.4 मिलियन25.4 million
- (D)32.3 मिलियन32.3 million
Show answer and explanation
Answer: (D)
32.3 मिलियन
32.3 million
आंतरिक विस्थापन निगरानी केंद्र (IDMC) के अनुसार 2015-2024 के दौरान भारत में आपदाओं से लगभग 32.3 मिलियन आंतरिक विस्थापन हुए, अधिकतर बाढ़ और चक्रवात से।
The Internal Displacement Monitoring Centre (IDMC) reported about 32.3 million disaster-induced internal displacements in India during 2015-2024, mostly due to floods and cyclones.
37.
निम्नलिखित में से कौन-सा, रासायनिक ऊर्जा के ऊष्मा ऊर्जा में रूपांतरण का सर्वोत्तम उदाहरण है?
Which of the following is the best example of the conversion of chemical energy into heat energy?
- (A)विद्युत से चलने वाली मोटरElectric motor
- (B)सौर कुकर से भोजन गर्म करनाHeating food in a solar cooker
- (C)बैटरी द्वारा बल्ब जलानाLighting a bulb with a battery
- (D)लकड़ी का जलनाBurning of wood
Show answer and explanation
Answer: (D)
लकड़ी का जलना
Burning of wood
लकड़ी का जलना दहन है: लकड़ी में संचित रासायनिक ऊर्जा ऊष्मा (और प्रकाश) के रूप में निकलती है। मोटर यांत्रिक ऊर्जा देती है और सौर कुकर सौर ऊर्जा प्रयोग करता है।
Burning wood is combustion: chemical energy stored in wood is released as heat (and light). A motor gives mechanical energy and a solar cooker uses solar energy.
38.
उत्तल लेंस को अभिसारी लेंस भी कहा जाता है, क्योंकि __________________।
A convex lens is also called a converging lens because __________________.
- (A)यह समानांतर किरणों को एक बिंदु पर केंद्रित करता हैit brings parallel rays to a focus at a point
- (B)यह प्रकाश किरणों को बिल्कुल भी बंकित नहीं करता हैit does not bend light rays at all
- (C)यह सदैव आभासी प्रतिबिम्ब बनाता हैit always forms virtual images
- (D)यह प्रकाश किरणों को एक दूसरे से दूर अपसारित करता हैit diverges rays of light away from each other
Show answer and explanation
Answer: (A)
यह समानांतर किरणों को एक बिंदु पर केंद्रित करता है
it brings parallel rays to a focus at a point
उत्तल लेंस समांतर किरणों को अंदर की ओर मोड़कर मुख्य फोकस पर मिला देता है, इसलिए इसे अभिसारी लेंस कहते हैं।
A convex lens bends parallel rays inward so that they meet at its principal focus; hence it is called a converging lens.
39.
यदि किसी तार की लंबाई दोगुनी कर दी जाए और उसके अनुप्रस्थ काट का क्षेत्रफल आधा कर दिया जाए, तो उसका प्रतिरोध हो जाएगा:
If the length of a wire is doubled and its cross-sectional area is halved, its resistance will become:
- (A)मूल का आधाHalf the original
- (B)मूल का चार गुनाFour times the original
- (C)मूल का एक-चौथाईOne-fourth the original
- (D)मूल का दोगुनाTwice the original
Show answer and explanation
Answer: (B)
मूल का चार गुना
Four times the original
R = ρL ÷ A। नया R = ρ(2L) ÷ (A ÷ 2) = 4ρL ÷ A = 4R। अतः प्रतिरोध मूल का चार गुना हो जाता है।
R = ρL ÷ A. New R = ρ(2L) ÷ (A ÷ 2) = 4ρL ÷ A = 4R. So the resistance becomes four times the original.
40.
निम्नलिखित में से कौन सी विधि फसलों के लिए जल उपलब्धता में वृद्धि हेतु सिंचाई की नई पहल का हिस्सा है?
Which of the following methods is part of the new initiatives in irrigation to increase water availability for crops?
- (A)वर्षा जल संचयन और जलग्रहण प्रबंधनRainwater harvesting and watershed management
- (B)खाद और रासायनिक छिड़कावManuring and chemical spraying
- (C)ड्रिप सिंचाई और फसल चक्रणDrip irrigation and crop rotation
- (D)स्प्रिं कलर सिंचाई और जुताईSprinkler irrigation and ploughing
Show answer and explanation
Answer: (A)
वर्षा जल संचयन और जलग्रहण प्रबंधन
Rainwater harvesting and watershed management
कृषि हेतु जल की उपलब्धता बढ़ाने के नए प्रयासों में वर्षा जल संचयन और जलसंभर (वाटरशेड) प्रबंधन शामिल हैं, जैसे चेक-डैम बनाकर भूजल बढ़ाना।
New initiatives to increase water available for agriculture include rainwater harvesting and watershed management (building check-dams to raise groundwater).
41.
धातुओं का संक्षारण एक ऐसी प्रक्रि या है, जिसमें ________________।
Corrosion of metals is a process in which ________________.
- (A)धातुएं अपना रंग स्थायी रूप से बदल देती हैंmetals change their colour permanently
- (B)धातुएं पर्यावरणीय कारकों के साथ अभिक्रि या करके ऑक्साइड, सल्फाइड या कार्बोनेट में रूपांतरित हो जाती हैंmetals are converted to oxides, sulphides or carbonates by reaction with environmental agents
- (C)अम्लों के साथ अभिक्रि या के कारण धातुओं का भार बढ़ जाता हैmetals gain weight due to reaction with acids
- (D)धातुएं निम्न तापमान पर पिघल जाती हैंmetals melt at low temperature
Show answer and explanation
Answer: (B)
धातुएं पर्यावरणीय कारकों के साथ अभिक्रि या करके ऑक्साइड, सल्फाइड या कार्बोनेट में रूपांतरित हो जाती हैं
metals are converted to oxides, sulphides or carbonates by reaction with environmental agents
संक्षारण में धातु नमी, वायु या रसायनों से अभिक्रिया कर धीरे-धीरे ऑक्साइड, सल्फाइड या कार्बोनेट में बदलती है, जैसे लोहे पर जंग लगना।
Corrosion is the slow conversion of a metal into its oxide, sulphide or carbonate by moisture, air or chemicals, e.g. rusting of iron.
42.
निम्नलिखित में से कौन-सा विकल्प पदार्थ के मापनीय गुण और उसकी SI इकाई के संदर्भ में सुमेलित है?
Which of the following options correctly matches a measurable property of matter with its SI unit?
- (A)आयतन-घन सेंटीमीटरVolume - Cubic centimetre
- (B)दाब-न्यूटनPressure - Newton
- (C)तापमान-कैलोरीTemperature - Calorie
- (D)घनत्व-किलोग्राम प्रति घन मीटरDensity - Kilogram per cubic metre
Show answer and explanation
Answer: (D)
घनत्व-किलोग्राम प्रति घन मीटर
Density - Kilogram per cubic metre
घनत्व का SI मात्रक किलोग्राम प्रति घन मीटर (kg/m³) है। दाब का पास्कल, आयतन का घन मीटर और ताप का केल्विन है।
The SI unit of density is kilogram per cubic metre (kg/m³). Pressure is in pascal, volume in cubic metre, temperature in kelvin.
43.
निम्नलिखित में से किस/किन कारक(कारकों) में वृद्धि से किसी चालक का प्रतिरोध बढ़ जाएगा?
(i) चालक का तापमान
(ii) चालक की लंबाई
(iii) चालक के अनुप्रस्थ काट का क्षेत्रफल
The increase in which of the following factor(s) will increase the resistance of a conductor?
(i) Temperature of the conductor
(ii) Length of the conductor
(iii) Area of cross-section of the conductor
- (A)(i) और (ii) दोनोंBoth (i) and (ii)
- (B)केवल (iii)Only (iii)
- (C)केवल (i)Only (i)
- (D)(ii) और (iii) दोनोंBoth (ii) and (iii)
Show answer and explanation
Answer: (A)
(i) और (ii) दोनों
Both (i) and (ii)
R = ρL ÷ A, अतः लंबाई बढ़ने पर प्रतिरोध बढ़ता है और धातुओं में ताप बढ़ने पर प्रतिरोधकता बढ़ती है। अनुप्रस्थ क्षेत्रफल बढ़ने से प्रतिरोध घटता है। अतः (i) और (ii) दोनों।
R = ρL ÷ A, so resistance rises with length, and for metals resistivity rises with temperature. A larger cross-sectional area lowers resistance. So both (i) and (ii).
44.
जंतुओं के संयोजी ऊतकों में, वसा कोशिकाएं लोब्यूल्स में व्यवस्थित होती हैं, जो ________________ के विभाजन द्वारा पृथक होती हैं।
In the connective tissues of animals, the fat cells are arranged into lobules, which are separated by partitions of:
- (A)कोलैजन और इलास्टिन तंतु (collagen and elastin fibres)collagen and elastin fibres
- (B)पीत तंतु और लसीका (yellow fibres and lymph)yellow fibres and lymph
- (C)कंकाल तंतु और कंडरा (skeletal fibres and tendons)skeletal fibres and tendons
- (D)रेटिकुलर तंतु और प्लाज्मा (reticular fibres and plasma)reticular fibres and plasma
Show answer and explanation
Answer: (A)
कोलैजन और इलास्टिन तंतु (collagen and elastin fibres)
collagen and elastin fibres
वसा (संयोजी) ऊतक में वसा कोशिकाएँ पालियों (लोब्यूल) में व्यवस्थित होती हैं, जिन्हें कोलेजन और इलास्टिन तंतुओं के विभाजक अलग करते हैं।
In adipose (connective) tissue, fat cells are grouped into lobules separated by connective tissue septa made of collagen and elastin fibres.
45.
अयस्क से अपअयस्क (gangue) को हटाने के लिए उपयोग की जाने वाली प्रक्रियाएं, अपअयस्क और अयस्क के किन गुणों के बीच अंतर पर आधारित हैं?
The processes used for removing the gangue from the ore are based on the differences between which properties of the gangue and the ore?
- (A)अपवर्तनांक (Refractive index)Refrative index
- (B)रासायनिक या भौतिकChemical or physical
- (C)केवल भौतिकOnly physical
- (D)केवल रासायनिकOnly chemical
Show answer and explanation
Answer: (B)
रासायनिक या भौतिक
Chemical or physical
गैंग को हटाने की विधियाँ गैंग और अयस्क के भौतिक या रासायनिक गुणों के अंतर पर आधारित होती हैं (जैसे फेन प्लवन, चुंबकीय पृथक्करण, निक्षालन)।
Gangue is removed by methods based on differences in the physical or chemical properties of the gangue and the ore (e.g. froth flotation, magnetic separation, leaching).
Other subjects in this paper
MathematicsGeneral Intelligence & ReasoningGeneral KnowledgeRailway General KnowledgeComputer & Financial Awareness
Practise free, every day!
Daily 10, flashcards, mock tests, streaks and 45,000+ real PYQs in Hindi and English.
Get it on Google Play Join our Telegram
Daily 10, flashcards, mock tests, streaks and 45,000+ real PYQs in Hindi and English.
Get it on Google Play Join our Telegram