RRB Group D CBT · 4 Feb 2026 · Shift 3 — सामान्य विज्ञान
RRB Group D · पिछले साल का प्रश्न पत्र
RRB Group D CBT · 4 Feb 2026 · Shift 3 — सामान्य विज्ञान (General Science) के 40 प्रश्न, सही उत्तर और हिंदी-अंग्रेज़ी स्पष्टीकरण सहित।
1.
दूरी-समय ग्राफ से, बिंदु A से बिंदु B तक गति करने वाली एक वस्तु (t2 − t1) समय में (s2 − s1) दूरी तय करती है। निम्नलिखित में से कौन-सा व्यंजक वस्तु की गति (v) का सही रूप निरूपित करता है?
From a distance-time graph, an object moving from point A to point B covers a distance (s2 − s1) in time (t2 − t1). Which of the following expressions correctly represents the speed (v) of the object?
- (अ)v = (t2 − t1)/(s2 − s1)
- (ब)v = (s2 − s1)(t2 − t1)
- (क)v = (s1 − s2)(t1 − t2)
- (ड)= (s2 − s1)/(t2 − t1)
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
= (s2 − s1)/(t2 − t1)
चाल = तय की गई दूरी ÷ लिया गया समय = (s2 − s1)/(t2 − t1), जो A और B के बीच दूरी-समय ग्राफ की ढाल है।
Speed = distance covered ÷ time taken = (s2 − s1)/(t2 − t1), which is the slope of the distance-time graph between A and B.
2.
गुरुत्वीय त्वरण के संबंध में निम्नलिखित में से कौन-सा/से कथन सत्य है/हैं?
(i) गुरुत्वीय त्वरण का मान गुरुत्व के प्रभाव में आने वाली वस्तु के द्रव्यमान पर निर्भर करता है।
(ii) गुरुत्वीय त्वरण का मान सार्वभौमिक रूप से स्थिर रहता है।
Which of the following statement(s) is/are true regarding acceleration due to gravity?
(i) The value of acceleration due to gravity depends on the mass of the object under the influence of gravity.
(ii) The value of acceleration due to gravity remains universally constant.
- (अ)न तो (i) और न ही (ii)Neither (i) nor (ii)
- (ब)केवल (ii)Only (ii)
- (क)(i) और (ii) दोनोंBoth (i) and (ii)
- (ड)केवल (i)Only (i)
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
न तो (i) और न ही (ii)
Neither (i) nor (ii)
g = GM/R² गिरती वस्तु के द्रव्यमान पर निर्भर नहीं करता, और यह सार्वत्रिक नियतांक भी नहीं है (ऊँचाई, गहराई, अक्षांश व ग्रह के साथ बदलता है). अतः कोई कथन सही नहीं।
g = GM/R² does not depend on the mass of the falling object, and it is not universally constant (it changes with height, depth, latitude and planet). So neither statement is true.
3.
एक लड़की ने एक चट्टान के पास ताली बजाई और 4 s के बाद प्रतिध्वनि सुनी। यदि ध्वनि की चाल 320 m s^–1 ली जाए तो लड़की से चट्टान की दूरी कितनी है?
A girl clapped her hands near a cliff and heard the echo after 4 s. What is the distance of the cliff from the girl if the speed of the sound is taken as 320 m s^–1?
- (अ)80 m
- (ब)1280 m
- (क)320 m
- (ड)640 m
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
640 m
ध्वनि चट्टान तक जाकर लौटती है: 2d = v × t = 320 × 4 = 1280 m. अतः d = 1280 ÷ 2 = 640. अतः उत्तर 640 m है।
Sound travels to the cliff and back: 2d = v × t = 320 × 4 = 1280 m. So d = 1280 ÷ 2 = 640. So the answer is 640 m.
4.
किसी परिनालिका के भीतर समान्तर सीधी चुम्बकीय क्षेत्र रेखाओं की उपस्थिति क्या दर्शाती है?
What does the presence of parallel straight magnetic field lines inside a solenoid indicate?
- (अ)परिनालिका के भीतर चुंबकीय क्षेत्र शून्य हैThe magnetic field inside the solenoid is zero
- (ब)चुंबकीय क्षेत्र असमान है और विभिन्न बिंदुओं पर बदलता रहता हैThe magnetic field is non-uniform and varies at different points
- (क)परिनालिका के भीतर चुंबकीय क्षेत्र अनंत हैThe magnetic field inside the solenoid is infinite
- (ड)परिनालिका के भीतर चुंबकीय क्षेत्र एकसमान हैThe magnetic field inside the solenoid is uniform
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
परिनालिका के भीतर चुंबकीय क्षेत्र एकसमान है
The magnetic field inside the solenoid is uniform
समांतर और समान दूरी वाली सीधी क्षेत्र रेखाएँ दर्शाती हैं कि परिनालिका के अंदर चुंबकीय क्षेत्र हर बिंदु पर समान परिमाण और दिशा का, अर्थात एकसमान है।
Parallel, equally spaced straight field lines show that the magnetic field inside a solenoid has the same strength and direction at all points, i.e. it is uniform.
5.
प्लास्टिक जैसे अजैव-निम्नीकरणीय अपशिष्ट के प्रबंधन का सर्वोत्तम तरीका क्या है?
What is the best way to manage non-biodegradable waste such as plastic?
- (अ)इसे खुली हवा में जलानाBurn it in open air
- (ब)इसे मिट्टी में दबानाBury it in soil
- (क)इसे पुनर्चक्रित करना और पुनः उपयोग करनाRecycle and reuse it
- (ड)इसे कम्पोस्ट में मिलानाMix it with compost
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
इसे पुनर्चक्रित करना और पुनः उपयोग करना
Recycle and reuse it
प्लास्टिक विघटित नहीं होता और जलाने पर विषैली गैसें निकलती हैं, इसलिए ऐसे अपशिष्ट के प्रबंधन का सर्वोत्तम उपाय पुनर्चक्रण और पुनः उपयोग है।
Plastic does not decompose, and burning it releases toxic gases, so recycling and reusing it is the best way to manage such waste.
6.
निरपेक्ष अपवर्तनांक के बारे में निम्नलिखित में से कौन-सा कथन सही है?
Which of the following statements is correct about the absolute refractive index?
- (अ)यह सदैव 1 के बराबर होता है।It is always equal to 1.
- (ब)यह सदैव 1 से कम होता है।It is always less than 1.
- (क)यह सदैव 1 से अधिक होता है।It is always greater than 1.
- (ड)यह सदैव ऋणात्मक होता है।It is always negative.
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
यह सदैव 1 से अधिक होता है।
It is always greater than 1.
निरपेक्ष अपवर्तनांक n = c ÷ v. प्रकाश निर्वात में सबसे तेज़ चलता है, अतः किसी भी माध्यम में v < c और n, 1 से अधिक होता है (केवल निर्वात के लिए 1)।
Absolute refractive index n = c ÷ v. Light is fastest in vacuum, so v < c in any material medium and n is greater than 1 (it equals 1 only for vacuum).
7.
CuO + H₂ → Cu + H₂O अभिक्रि या में, निम्न में से कौन-सा पदार्थ ऑक्सीकृत होता है?
In the reaction CuO + H₂ → Cu + H₂O, which of the following substances is oxidised?
- (अ)जलWater
- (ब)कॉपर ऑक्साइडCopper oxide
- (क)हाइड्रोजनHydrogen
- (ड)कॉपरCopper
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
हाइड्रोजन
Hydrogen
हाइड्रोजन ऑक्सीजन ग्रहण करके H₂O बनाता है, अतः हाइड्रोजन का ऑक्सीकरण होता है; CuO ऑक्सीजन खोकर Cu में अपचयित होता है।
Hydrogen gains oxygen to form H₂O, so hydrogen is oxidised; CuO loses oxygen and is reduced to Cu.
8.
निम्नलिखित में से कौन-सा एक ऊतक नहीं है?
Which one of the following is NOT a tissue?
- (अ)तंत्रिकाएँNerves
- (ब)रक्तBlood
- (क)पेशियाँMuscles
- (ड)लाल रक्त कोशिकाएँRed blood cells
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
लाल रक्त कोशिकाएँ
Red blood cells
ऊतक समान कोशिकाओं का समूह है जो एक साझा कार्य करता है. रक्त, पेशी और तंत्रिका ऊतक हैं, जबकि लाल रक्त कोशिकाएँ अलग-अलग कोशिकाएँ हैं (रक्त ऊतक का भाग)।
A tissue is a group of similar cells doing a common function. Blood, muscles and nerves are tissues, but red blood cells are individual cells (part of blood tissue).
9.
एकसमान वृत्तीय गति में, किसी वस्तु के वेग की दिशा होती है:
In uniform circular motion, the direction of velocity of an object is:
- (अ)घूर्णन अक्ष के लंबवतPerpendicular to the axis of rotation
- (ब)त्रिज्या के अनुदिश, केंद्र से दूरAlong the radius, away from the center
- (क)वृत्तीय पथ की स्पर्शरेखीयTangential to the circular path
- (ड)त्रिज्या के अनुदिश, केंद्र की ओरAlong the radius, toward the center
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
वृत्तीय पथ की स्पर्शरेखीय
Tangential to the circular path
एकसमान वृत्तीय गति में चाल स्थिर रहती है, पर प्रत्येक बिंदु पर वेग वृत्त की स्पर्श रेखा की दिशा में होता है, इसलिए उसकी दिशा लगातार बदलती है।
In uniform circular motion the speed is constant but the velocity at every point is along the tangent to the circle, so its direction keeps changing.
10.
बर्फ के पिघलने के दौरान बर्फ का तापमान स्थिर क्यों रहता है?
Why does the temperature of ice remain constant during the melting of ice?
- (अ)बर्फ ऊष्मा अवशोषित करती है किंतु पिघलती नहीं हैIce absorbs heat but does not melt
- (ब)बर्फ अधिक सघन हो जाती हैIce becomes denser
- (क)ऊष्मा का उपयोग अणुओं के बीच के बंधों को तोड़ने में होता हैHeat is used to break the bonds between molecules
- (ड)बर्फ ऊष्मा को परावर्तित कर देती हैIce reflects heat
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
ऊष्मा का उपयोग अणुओं के बीच के बंधों को तोड़ने में होता है
Heat is used to break the bonds between molecules
पिघलने के समय दी गई ऊष्मा (संगलन की गुप्त ऊष्मा) अणुओं के बीच के बलों को तोड़ने में लगती है, ताप बढ़ाने में नहीं, अतः पूरी बर्फ पिघलने तक ताप 0 °C रहता है।
During melting, the heat supplied (latent heat of fusion) is used to overcome the forces between molecules rather than raise the temperature, so it stays at 0 °C until all ice melts.
11.
निम्नलिखित में से कौन-सी अभिक्रि या, उदासीनीकरण अभिक्रि या है?
Which of the following types of reactions is a neutralisation reaction?
- (अ)एकल विस्थापन (Single displacement)Single displacement
- (ब)दोहरा विस्थापन (Double displacement)Double displacement
- (क)अपघटन (Decomposition)Decomposition
- (ड)दहन (Combustion)Combustion
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
दोहरा विस्थापन (Double displacement)
Double displacement
उदासीनीकरण में अम्ल और क्षार आयनों का आदान-प्रदान कर लवण और जल बनाते हैं (जैसे NaOH + HCl → NaCl + H₂O), जो द्विविस्थापन अभिक्रिया है।
In neutralisation, an acid and a base exchange ions to form salt and water (e.g. NaOH + HCl → NaCl + H₂O), which is a double displacement reaction.
12.
किसी जाति (species) के भीतर विविधता क्या सुनिश्चित करती है?
What does variation within a species ensure?
- (अ)कोई उत्परिवर्तन नहींNo mutations
- (ब)कोई विकास नहींNo evolution
- (क)बेहतर अनुकूलनशीलता और उत्तरजीविता की संभावनाएँBetter adaptability and chances of survival
- (ड)पर्यावरणीय परिवर्तनों के प्रति समान प्रतिक्रियाSimilar response to environmental changes
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
बेहतर अनुकूलनशीलता और उत्तरजीविता की संभावनाएँ
Better adaptability and chances of survival
विभिन्नता से कुछ जीव बदले पर्यावरण के अधिक अनुकूल हो सकते हैं, जिससे जाति की अनुकूलन क्षमता और जीवित रहने की संभावना बढ़ती है; यही विकास का आधार भी है।
Variation means some individuals may suit a changed environment better, so the species has better adaptability and chances of survival; variation is also the basis of evolution.
13.
गोलीय लेंसों के लिए चिह्न परिपाटी के अनुसार निम्नलिखित में से कौन-सा सही नहीं है?
Which of the following is NOT correct according to the sign convention for spherical lenses?
- (अ)उत्तल लेंस की फोकस दूरी ऋणात्मक ली जाती है।Focal length of a convex lens is taken as negative.
- (ब)वस्तु को सदैव लेंस के बाईं ओर रखा जाता है।Object is always placed on the left of the lens.
- (क)प्रकाशिक केंद्र के दाईं ओर मापी गई दूरियाँ धनात्मक होती हैं।Distances measured to the right of the optical centre are positive.
- (ड)अवतल लेंस की फोकस दूरी ऋणात्मक ली जाती है।Focal length of a concave lens is taken as negative.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
उत्तल लेंस की फोकस दूरी ऋणात्मक ली जाती है।
Focal length of a convex lens is taken as negative.
चिह्न परिपाटी के अनुसार उत्तल लेंस की फोकस दूरी धनात्मक और अवतल लेंस की ऋणात्मक होती है, अतः उत्तल लेंस की फोकस दूरी ऋणात्मक कहना गलत है।
By sign convention the focal length of a convex lens is positive and that of a concave lens is negative, so saying a convex lens has negative focal length is incorrect.
14.
हंगरी के बुडापेस्ट में 2024 की विश्व शॉर्ट कोर्स तैराकी चैंपियनशिप के दौरान किस तैराक ने 400 m फ्रीस्टाइल, 200 m IM और 400 m IM में कई विश्व रिकॉर्ड बनाए?
Which swimmer set multiple WRs in the 400 m freestyle, 200 m IM, and 400 m IM during the World Short Course Swimming Championships in Budapest, Hungary, 2024?
- (अ)केटी लेडेकीKatie Ledecky
- (ब)कैटिंका होस्जूKatinka Hosszú
- (क)एरियर्न टिटमसAriarne Titmus
- (ड)समर मैकिंटोशSummer McIntosh "
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
समर मैकिंटोश
Summer McIntosh "
कनाडा की समर मैकिन्टॉश ने 2024 बुडापेस्ट विश्व शॉर्ट कोर्स चैंपियनशिप में 400 m फ्रीस्टाइल, 200 m IM और 400 m IM में विश्व रिकॉर्ड बनाए।
Canada's Summer McIntosh set short-course world records in the 400 m freestyle, 200 m IM and 400 m IM at the 2024 World Short Course Championships in Budapest.
15.
गुरुत्वीय त्वरण के संबंध में निम्नलिखित में से कौन-सा/से कथन सत्य है/हैं?
(i) गुरुत्वीय त्वरण का मान गुरुत्व के प्रभाव में गिरने वाली वस्तु के द्रव्यमान पर निर्भर करता है।
(ii) गुरुत्वीय त्वरण का मान सार्वभौमिक रूप से स्थिर रहता है।
Which of the following is/are true about the acceleration due to gravity?
(i) The value of acceleration due to gravity depends on the mass of the object falling under the effect of gravity.
(ii) The value of acceleration due to gravity is universally constant.
- (अ)केवल (ii)Only (ii)
- (ब)केवल (i)Only (i)
- (क)न तो (i) और न ही (ii)Neither (i) nor (ii)
- (ड)(i) और (ii) दोनोंBoth (i) and (ii)
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
न तो (i) और न ही (ii)
Neither (i) nor (ii)
g = GM/R² गिरती वस्तु के द्रव्यमान पर निर्भर नहीं है और सार्वत्रिक नियतांक भी नहीं (ऊँचाई, गहराई, अक्षांश व ग्रह के साथ बदलता है), अतः कोई कथन सही नहीं।
g = GM/R² is independent of the falling object's mass and is not universally constant (it varies with height, depth, latitude and planet), so neither statement is true.
16.
फसलों की समय पर बुआई किसान के लिए किस प्रकार लाभदायक है?
How is the timely sowing of crops helpful for the farmer?
- (अ)इससे खरपतवार की वृद्धि बढ़ती है।It increases weed growth.
- (ब)इससे खरपतवारों के साथ प्रतिस्पर्धा से बचा जा सकता है।It avoids competition with weeds.
- (क)इससे पीड़क आकर्षित होते हैं।It attracts pests.
- (ड)इससे फसल की पैदावार कम होती है।It decreases crop yield.
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
इससे खरपतवारों के साथ प्रतिस्पर्धा से बचा जा सकता है।
It avoids competition with weeds.
समय पर बुवाई से फसल खरपतवारों से पहले जम जाती है, जिससे प्रकाश, जल और पोषक तत्वों के लिए खरपतवारों से प्रतिस्पर्धा नहीं होती और उपज बढ़ती है।
Timely sowing lets the crop establish before weeds grow, so it avoids competition with weeds for light, water and nutrients and improves yield.
17.
निम्नलिखित में से कौन-सा ऊतक नहीं है?
Which of the following is NOT a tissue?
- (अ)लाल रक्त कणिकाएंRed blood cells
- (ब)तंत्रिकाएंNerves
- (क)रूधिरBlood
- (ड)पेशियांMuscles
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
लाल रक्त कणिकाएं
Red blood cells
ऊतक समान कार्य करने वाली समान कोशिकाओं का समूह है. रक्त, तंत्रिका और पेशी ऊतक हैं, जबकि लाल रक्त कोशिकाएँ एकल कोशिकाएँ हैं जो रक्त का भाग हैं।
A tissue is a group of similar cells with a common function. Blood, nerves and muscles are tissues, whereas red blood cells are single cells that form part of blood.
18.
यौन संचारित रोग एड्स (AIDS) निम्नलिखित में से किसके कारण होता है?
The sexually transmitted disease AIDS is caused by which of the following?
- (अ)प्रोटोजोआProtozoa
- (ब)वायरसVirus
- (क)कृमि (हेल्मिंथ)Helminths
- (ड)बैक्टीरियाBacteria
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
वायरस
Virus
AIDS, HIV (ह्यूमन इम्यूनोडेफिशिएंसी वायरस) नामक विषाणु से होता है, जो शरीर के प्रतिरक्षा तंत्र पर आक्रमण करता है।
AIDS is caused by HIV (Human Immunodeficiency Virus), a virus that attacks the body's immune system.
19.
उन धातुओं के सल्फाइड अयस्क, जो सक्रियता श्रेणी के मध्य में स्थित होते हैं, पहले ऑक्साइड में रूपांतरित होते हैं। इस रूपांतरण के लिए आवश्यक शर्त _____________________ है।
The sulphide ores of metals that lie in the middle of the activity series are first converted into oxides. The necessary condition for this conversion is _____________________.
- (अ)ऑक्सीजन की अनुपस्थितिabsence of oxygen
- (ब)उच्च दाब की उपस्थितिpresence of high pressure
- (क)उच्च तापमान की उपस्थितिpresence of high temperature
- (ड)अधिक वायु की उपस्थितिpresence of excess air
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
अधिक वायु की उपस्थिति
presence of excess air
सल्फाइड अयस्कों को भर्जन द्वारा ऑक्साइड में बदला जाता है, अर्थात अधिक वायु की उपस्थिति में तेज़ गर्म करके (जैसे 2ZnS + 3O₂ → 2ZnO + 2SO₂)।
Sulphide ores are converted to oxides by roasting, i.e. heating strongly in the presence of excess air (e.g. 2ZnS + 3O₂ → 2ZnO + 2SO₂).
20.
योगज अभिक्रि या में सामान्यतः क्या शामिल होता है?
What is typically involved in an addition reaction?
- (अ)प्रकार्यात्मक समूहों को अन्य समूहों से प्रतिस्थापित किया जाता हैFunctional groups are replaced by other groups
- (ब)परमाणु असंतृप्त आबंधों में जुड़ जाते हैंAtoms get added to unsaturated bonds
- (क)बिना नए आबंधन के ऑक्सीकरण परिवर्तित होता हैOxidation changes without new bonding
- (ड)अणुओं से परमाणुओं को हटाया जाता हैAtoms are removed from molecules
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
परमाणु असंतृप्त आबंधों में जुड़ जाते हैं
Atoms get added to unsaturated bonds
योगात्मक अभिक्रिया में असंतृप्त यौगिक के द्विबंध या त्रिबंध पर परमाणु या समूह जुड़ते हैं, जैसे निकेल उत्प्रेरक की उपस्थिति में वनस्पति तेलों का हाइड्रोजनीकरण।
In an addition reaction, atoms or groups add across a double or triple bond of an unsaturated compound, e.g. hydrogenation of vegetable oils with a nickel catalyst.
21.
उन धातुओं के सल्फाइड अयस्क, जो सक्रियता श्रेणी के मध्य में स्थित होते हैं, पहले ऑक्साइड में रूपांतरित किए जाते हैं। इस रूपांतरण के लिए आवश्यक शर्त है:
The sulphide ores of metals, which lie in the middle of activity series, are first converted to oxides. The necessary condition for this conversion is:
- (अ)उच्च तापमान की उपस्थितिpresence of high temperature
- (ब)उच्च दाब की उपस्थितिpresence of high pressure
- (क)अधिक वायु की उपस्थितिpresence of excess air
- (ड)ऑक्सीजन की अनुपस्थितिabsence of oxygen
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
अधिक वायु की उपस्थिति
presence of excess air
सल्फाइड अयस्कों को भर्जन द्वारा ऑक्साइड में बदला जाता है, अर्थात अधिक वायु की उपस्थिति में तेज़ गर्म करके (जैसे 2ZnS + 3O₂ → 2ZnO + 2SO₂)।
Sulphide ores are changed into oxides by roasting, i.e. strong heating in the presence of excess air (e.g. 2ZnS + 3O₂ → 2ZnO + 2SO₂).
22.
कौन-सी विशेषता, सभी ठोस पदार्थों के लिए समान है?
Which characteristic is common to all solids?
- (अ)ऊर्जा प्रयुक्त होने पर अनंत विस्तार क्षमताUnlimited ability to expand when energy is applied
- (ब)दाब प्रयुक्त करने पर सुगमता से संपीड्य होने वाली संरचनाA structure that compresses easily when pressure is applied
- (क)सामान्य परिस्थितियों में निश्चित आयतन और आकारDefinite volume and shape under normal conditions
- (ड)खुले पात्रों में द्रव पदार्थों की तरह प्रवाह की क्षमताAbility to flow like liquids in open containers
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
सामान्य परिस्थितियों में निश्चित आयतन और आकार
Definite volume and shape under normal conditions
ठोस के कण प्रबल आकर्षण बलों से सघन रूप से बंधे होते हैं, इसलिए सभी ठोसों का निश्चित आकार और निश्चित आयतन होता है और वे लगभग असंपीड्य होते हैं।
Particles in a solid are tightly packed with strong attractive forces, so all solids have a definite shape and definite volume and are nearly incompressible.
23.
योगज अभिक्रिया (addition reaction) में सामान्यतः क्या शामिल होता है?
What is typically involved in an addition reaction?
- (अ)बिना नए आबंधन के ऑक्सीकरण में परिवर्तनOxidation changes without new bonding
- (ब)अणुओं से परमाणुओं का हटाया जानाRemoval of atoms from molecules takes place
- (क)प्रकार्यात्मक समूहों का अन्य समूहों द्वारा प्रतिस्थापनFunctional groups are replaced by others
- (ड)परमाणुओं का असंतृप्त आबंधों में जुड़ जानाAtoms get added to unsaturated bonds
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
परमाणुओं का असंतृप्त आबंधों में जुड़ जाना
Atoms get added to unsaturated bonds
योगात्मक अभिक्रिया में असंतृप्त यौगिक के द्विबंध या त्रिबंध पर परमाणु या समूह जुड़ते हैं, जैसे निकेल उत्प्रेरक से तेलों का हाइड्रोजनीकरण।
An addition reaction adds atoms or groups across the double or triple bond of an unsaturated compound, e.g. hydrogenation of oils using a nickel catalyst.
24.
परमाणु में प्रोटॉन कहाँ पाए जाते हैं?
Where are protons found in an atom?
- (अ)ऊर्जा स्तरों मेंEnergy Levels
- (ब)नाभिक मेंNucleus
- (क)कक्षकों मेंOrbitals
- (ड)इलेक्ट्रॉन अभ्र मेंElectron Cloud
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
नाभिक में
Nucleus
प्रोटॉन, न्यूट्रॉनों के साथ, परमाणु के केंद्र में स्थित नाभिक में होते हैं; इलेक्ट्रॉन इसके चारों ओर ऊर्जा स्तरों (कक्षकों) में रहते हैं।
Protons, together with neutrons, are located in the nucleus at the centre of the atom; electrons occupy the energy levels (orbitals) around it.
25.
किसी पिंड पर कार्यरत एकसमान बल द्वारा किए गए कार्य के संबंध में निम्नलिखित में से कौन-से कथन सत्य नहीं हैं?
(i) बल द्वारा किया गया कार्य कभी भी ऋणात्मक नहीं हो सकता।
(ii) यदि बल की दिशा और पिंड के विस्थापन समान हैं, तो किया गया कार्य धनात्मक होगा।
(iii) किए गए कार्य का S.I. मात्रक पास्कल होता है।
Which of the following statements are NOT true regarding the work done by a constant force acting on a body?
(i) The work done by the force can never be negative.
(ii) If the direction of the force and the displacement of the body are the same, the work done will be positive.
(iii) The S.I. unit of work done is Pascal.
- (अ)केवल (ii)Only (ii)
- (ब)(i) और (iii) दोनोंBoth (i) and (iii)
- (क)केवल (i)Only (i)
- (ड)(ii) और (iii) दोनोंBoth (ii) and (iii)
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
(i) और (iii) दोनों
Both (i) and (iii)
बल विस्थापन के विपरीत हो तो कार्य ऋणात्मक होता है, अतः (i) गलत. कार्य का SI मात्रक जूल है, पास्कल नहीं, अतः (iii) गलत. (ii) सही है. अतः उत्तर (i) और (iii) दोनों है।
Work can be negative when force opposes displacement, so (i) is false. The SI unit of work is the joule, not the pascal, so (iii) is false. (ii) is true. So the answer is Both (i) and (iii).
26.
यदि धारा को नियत रखते हुए फेरों की संख्या (n) बढ़ा दी जाए, तो वृत्तीय कुंडली द्वारा उत्पन्न चुंबकीय क्षेत्र की प्रबलता का क्या होता है?
What happens to the magnetic field strength produced by a circular coil if the number of turns (n) is increased while keeping the current constant?
- (अ)यह एकल फेरे के समान ही रहती है।It remains the same as for a single turn.
- (ब)यह n के साथ व्युत्क्रमानुपाती रूप से घटती है।It decreases inversely with n.
- (क)यह एकल फेरे की तुलना में n गुना अधिक हो जाती है।It becomes n times larger than for a single turn.
- (ड)यह केवल तभी बढ़ती है जब व्यास भी बढ़ाया जाता है।It only increases if the diameter is also increased.
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
यह एकल फेरे की तुलना में n गुना अधिक हो जाती है।
It becomes n times larger than for a single turn.
n फेरों वाली कुंडली में प्रत्येक फेरे में धारा एक ही दिशा में बहती है, इसलिए सबके क्षेत्र जुड़ जाते हैं और चुंबकीय क्षेत्र एक फेरे का n गुना हो जाता है।
In a coil of n turns the field of each turn adds up, since the current flows the same way in every turn, so the field becomes n times that of a single turn.
27.
जब ATP में टर्मिनल फॉस्फेट लिंकेज को जल का उपयोग करके तोड़ा जाता है, तो ______ kJ/mol के बराबर ऊर्जा मुक्त होती है।
When the terminal phosphate linkage in ATP is broken using water, the energy equivalent to ______ kJ/mol is released.
- (अ)50
- (ब)71.5
- (क)30.5
- (ड)5
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
30.5
ATP के अंतिम फॉस्फेट बंध का जल-अपघटन (ATP → ADP + Pi) लगभग 30.5 kJ/mol ऊर्जा मुक्त करता है, जो कोशिकीय क्रियाओं में उपयोग होती है।
Hydrolysis of the terminal phosphate bond of ATP (ATP → ADP + Pi) releases about 30.5 kJ/mol of energy, which drives cellular reactions.
28.
यदि धारा को नियत रखते हुए फेरों की संख्या (n) बढ़ा दी जाए, तो वृत्तीय कुंडली द्वारा उत्पन्न चुंबकीय क्षेत्र की प्रबलता पर क्या प्रभाव पड़ता है?
What happens to the magnetic field strength produced by a circular coil if the number of turns (n) is increased while the current is kept constant?
- (अ)यह एकल फेरे के समान ही रहती है।It remains the same as for a single turn.
- (ब)यह केवल तभी बढ़ती है जब व्यास भी बढ़ाया जाता है।It increases only if the diameter is also increased.
- (क)यह एकल फेरे की तुलना में n गुना अधिक हो जाती है।It becomes n times larger than for a single turn.
- (ड)यह n के साथ व्युत्क्रमानुपाती रूप से घटती है।It decreases inversely with n.
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
यह एकल फेरे की तुलना में n गुना अधिक हो जाती है।
It becomes n times larger than for a single turn.
n फेरों में धारा एक ही दिशा में बहने से सभी फेरों के क्षेत्र जुड़ जाते हैं, अतः चुंबकीय क्षेत्र एक फेरे से उत्पन्न क्षेत्र का n गुना हो जाता है।
With n turns carrying current in the same direction, the fields of all turns add up, so the field becomes n times that produced by a single turn.
29.
किसी परिनालिका के भीतर समांतर सीधी चुंबकीय क्षेत्र रेखाओं की उपस्थिति क्या दर्शाती है?
What does the presence of parallel straight magnetic field lines inside a solenoid indicate?
- (अ)परिनालिका के भीतर चुंबकीय क्षेत्र एकसमान हैThe magnetic field is uniform inside the solenoid
- (ब)परिनालिका के भीतर चुंबकीय क्षेत्र शून्य हैThe magnetic field is zero inside the solenoid
- (क)चुंबकीय क्षेत्र असमान है और विभिन्न बिंदुओं पर बदलता रहता हैThe magnetic field is non-uniform and changes at different points
- (ड)परिनालिका के भीतर चुंबकीय क्षेत्र अनंत हैThe magnetic field is infinite inside the solenoid
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
परिनालिका के भीतर चुंबकीय क्षेत्र एकसमान है
The magnetic field is uniform inside the solenoid
समांतर और समान दूरी वाली सीधी क्षेत्र रेखाएँ दर्शाती हैं कि परिनालिका के अंदर हर बिंदु पर क्षेत्र का परिमाण और दिशा समान है, अर्थात क्षेत्र एकसमान है।
Parallel, equally spaced straight field lines show the field has the same magnitude and direction at every point inside the solenoid, i.e. it is uniform.
30.
अभिक्रिया CuO + H₂ → Cu + H₂O में, कौन-सा पदार्थ ऑक्सीकृत होता है?
In the reaction CuO + H₂ → Cu + H₂O, which substance is oxidised?
- (अ)कॉपर ऑक्साइडCopper oxide
- (ब)कॉपरCopper
- (क)जलWater
- (ड)हाइड्रोजनHydrogen
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
हाइड्रोजन
Hydrogen
हाइड्रोजन ऑक्सीजन ग्रहण कर H₂O बनता है, अतः उसका ऑक्सीकरण होता है, जबकि CuO ऑक्सीजन खोकर कॉपर में अपचयित होता है।
Hydrogen gains oxygen to become H₂O, so it is oxidised, while CuO loses oxygen and is reduced to copper.
31.
किसी पिंड पर कार्यरत एकसमान बल द्वारा किए गए कार्य के संबंध में निम्नलिखित में से कौन-सा/से कथन सत्य नहीं है/हैं?
(i) बल द्वारा किया गया कार्य कभी भी ऋणात्मक नहीं हो सकता।
(ii) यदि बल की दिशा और पिंड का विस्थापन समान हैं, तो किया गया कार्य धनात्मक होगा।
(iii) किए गए कार्य का S.I. मात्रक पास्कल है।
Which of the following statements is/are NOT true regarding the work done by a constant force acting on a body?
(i) The work done by the force can never be negative.
(ii) If the direction of the force and displacement of the body is same, the work done will be positive.
(iii) The S.I. unit of work done is Pascal.
- (अ)केवल (ii)Only (ii)
- (ब)केवल (i)Only (i)
- (क)(ii) और (iii) दोनोंBoth (ii) and (iii)
- (ड)(i) और (iii) दोनोंBoth (i) and (iii)
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
(i) और (iii) दोनों
Both (i) and (iii)
बल विस्थापन के विपरीत हो तो कार्य ऋणात्मक होता है, अतः (i) गलत; कार्य का SI मात्रक जूल है, पास्कल नहीं, अतः (iii) गलत; (ii) सही. अतः उत्तर (i) और (iii) दोनों है।
Work is negative when force opposes displacement, so (i) is false; the SI unit of work is the joule, not the pascal, so (iii) is false; (ii) is true. So the answer is Both (i) and (iii).
32.
गोलीय लेंस के लिए चिह्न परिपाटी के अनुसार निम्नलिखित में से कौन-सा, सही नहीं है?
According to the sign convention for spherical lenses, which of the following is NOT correct?
- (अ)अवतल लेंस की फोकस दूरी ऋणात्मक मानी जाती है।The focal length of a concave lens is taken as negative.
- (ब)उत्तल लेंस की फोकस दूरी ऋणात्मक मानी जाती है।The focal length of a convex lens is taken as negative.
- (क)वस्तु सदैव लेंस के बाईं ओर रखी जाती है।The object is always placed to the left of the lens.
- (ड)प्रकाशिक केन्द्र के दाईं ओर मापी गई दूरियां धनात्मक होती हैं।Distances measured to the right of the optical centre are positive.
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
उत्तल लेंस की फोकस दूरी ऋणात्मक मानी जाती है।
The focal length of a convex lens is taken as negative.
चिह्न परिपाटी में उत्तल लेंस की फोकस दूरी धनात्मक और अवतल लेंस की ऋणात्मक होती है, अतः उत्तल लेंस की फोकस दूरी ऋणात्मक कहना गलत है।
By the sign convention a convex lens has a positive focal length and a concave lens a negative one, so the statement that a convex lens has negative focal length is not correct.
33.
फसलों की समय पर बुआई किसान के लिए किस प्रकार लाभदायक है?
How is the timely sowing of crops beneficial to the farmer?
- (अ)इससे फसल पैदावार कम होती है।It decreases crop yield.
- (ब)इससे पीड़क आकर्षित होते हैं।It attracts pests.
- (क)इससे खरपतवारों के साथ प्रतिस्पर्धा से बचा जा सकता है।It helps avoid competition with weeds.
- (ड)इससे खरपतवार की वृद्धि बढ़ती है।It increases weed growth.
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
इससे खरपतवारों के साथ प्रतिस्पर्धा से बचा जा सकता है।
It helps avoid competition with weeds.
सही समय पर बुवाई से फसल खरपतवारों से पहले बढ़ जाती है, जिससे जल, प्रकाश और पोषक तत्वों के लिए खरपतवारों से प्रतिस्पर्धा नहीं होती और उपज बढ़ती है।
Sowing at the right time lets the crop grow before weeds establish, so it avoids competition with weeds for water, light and nutrients and raises yield.
34.
एकसमान वृत्तीय गति में, किसी वस्तु के वेग की दिशा ________ होती है।
In uniform circular motion, the direction of the velocity of an object is ________.
- (अ)त्रिज्या के अनुदिश, केंद्र की ओरalong the radius, towards the centre
- (ब)घूर्णन अक्ष के लंबवतperpendicular to the axis of rotation
- (क)त्रिज्या के अनुदिश, केंद्र से दूरalong the radius, away from the centre
- (ड)वृत्तीय पथ के स्पर्शरेखीयtangential to the circular path
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
वृत्तीय पथ के स्पर्शरेखीय
tangential to the circular path
एकसमान वृत्तीय गति में किसी भी बिंदु पर वेग वृत्त की स्पर्श रेखा की दिशा में होता है, इसलिए चाल स्थिर रहते हुए भी दिशा लगातार बदलती है।
In uniform circular motion the velocity at any point is along the tangent to the circle, so its direction changes continuously even though the speed is constant.
35.
रूक्ष अंतःप्रद्रव्यी जालिका (RER) प्रोटीन संश्लेषण के लिए _______ धारण करती है, जबकि चिकनी अंतःप्रद्रव्यी जालिका (SER) _______ का संश्लेषण करती है।
The rough endoplasmic reticulum (RER) bears _______ for protein synthesis, while the smooth endoplasmic reticulum (SER) synthesises _______.
- (अ)लाइसोसोम; DNAlysosomes; DNA
- (ब)एंजाइम; शर्कराenzymes; sugars
- (क)छिद्र; RNApores; RNA
- (ड)राइबोसोम; लिपिडribosomes; lipids
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
राइबोसोम; लिपिड
ribosomes; lipids
RER की सतह पर राइबोसोम होते हैं जो प्रोटीन बनाते हैं; SER पर राइबोसोम नहीं होते और यह झिल्ली के लिए आवश्यक लिपिड (वसा व स्टेरॉयड) बनाता है।
RER is studded with ribosomes, which make proteins; SER has no ribosomes and makes lipids (fats and steroids) needed for membranes.
36.
अंडे के निर्माण के दौरान अंडाशय और गर्भाशय में होने वाले नियमित परिवर्तनों को क्या कहा जाता है?
The regular changes in the ovary and uterus during egg formation is called ________.
- (अ)मद चक्र (estrous cycle)estrous cycle
- (ब)आर्तव चक्र (menstrual cycle)menstrual cycle
- (क)निषेचन चक्र (fertilisation cycle)fertilisation cycle
- (ड)सर्केडियन लय (circadian rhythm)circadian rhythm
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
आर्तव चक्र (menstrual cycle)
menstrual cycle
मानव स्त्रियों में अंड-निर्माण से जुड़े अंडाशय और गर्भाशय के मासिक चक्रीय परिवर्तनों को ऋतुस्राव (मासिक) चक्र कहते हैं (लगभग 28 दिन)।
In human females the monthly cyclic changes in the ovary and uterus linked to egg release are called the menstrual cycle (about 28 days).
37.
बर्फ पिघलने के दौरान बर्फ का तापमान स्थिर क्यों रहता है?
Why does the temperature of ice remain constant during melting?
- (अ)ऊष्मा का उपयोग अणुओं के बीच के आबंधों को विच्छेदित करने के लिए किया जाता हैHeat is used to break the bonds between molecules
- (ब)बर्फ ऊष्मा को अवशोषित करती है लेकिन पिघलती नहीं हैIce absorbs heat but does not melt
- (क)बर्फ सघन हो जाती हैIce becomes denser
- (ड)बर्फ ऊष्मा को परावर्तित करती हैIce reflects heat
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
ऊष्मा का उपयोग अणुओं के बीच के आबंधों को विच्छेदित करने के लिए किया जाता है
Heat is used to break the bonds between molecules
पिघलते समय अवशोषित ऊष्मा (संगलन की गुप्त ऊष्मा) अणुओं के बीच आकर्षण को तोड़ने में लगती है, ताप बढ़ाने में नहीं, अतः पूरी बर्फ पिघलने तक ताप 0 °C रहता है।
The heat absorbed during melting (latent heat of fusion) is used to overcome the attraction between molecules, not to raise temperature, so ice stays at 0 °C until fully melted.
38.
रूक्ष अंतःप्रद्रव्यी जालिका (RER) प्रोटीन संश्लेषण के लिए _____ धारण करती है, जबकि चिकनी अंतःप्रद्रव्यी जालिका (SER) _____ का संश्लेषण करती है।
Rough endoplasmic reticulum (RER) bears _____ for protein synthesis, while smooth endoplasmic reticulum (SER) synthesizes _____.
- (अ)राइबोसोम; लिपिडribosomes; lipids
- (ब)छिद्र; RNApores; RNA
- (क)लाइसोसोम; DNAlysosomes; DNA
- (ड)एंजाइम; शर्कराenzymes; sugars
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
राइबोसोम; लिपिड
ribosomes; lipids
RER की सतह पर राइबोसोम होते हैं जो प्रोटीन संश्लेषण करते हैं; SER पर राइबोसोम नहीं होते और यह वसा व स्टेरॉयड जैसे लिपिड बनाता है।
RER carries ribosomes on its surface, which synthesise proteins; SER lacks ribosomes and synthesises lipids such as fats and steroids.
39.
किस तैराक ने बुडापेस्ट, हंगरी में 2024 में होने वाली विश्व शॉर्ट कोर्स तैराकी चैंपियनशिप के दौरान 400 m फ्रीस्टाइल, 200 m IM और 400 m IM में एकाधिक विश्व रिकॉर्ड बनाए?
Which swimmer set multiple world records in the 400 m freestyle, 200 m IM and 400 m IM during the World Short Course Swimming Championships held in Budapest, Hungary in 2024?
- (अ)एरियन टिटमसAriarne Titmus
- (ब)समर मैकिन्टोशSummer McIntosh
- (क)कातिंका होस्ज़ुKatinka Hosszú
- (ड)केटी लेडेकीKatie Ledecky
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
समर मैकिन्टोश
Summer McIntosh
कनाडा की समर मैकिन्टॉश ने 2024 बुडापेस्ट विश्व शॉर्ट कोर्स चैंपियनशिप में 400 m फ्रीस्टाइल, 200 m IM और 400 m IM में विश्व रिकॉर्ड बनाए।
Canada's Summer McIntosh set world records in the 400 m freestyle, 200 m IM and 400 m IM at the 2024 World Short Course Championships in Budapest.
40.
कौन-सी विशेषता सभी ठोस पदार्थों के लिए समान है?
Which feature is common to all solids?
- (अ)ऊर्जा प्रदान करने पर अनंत विस्तार क्षमताInfinite expansion capability with added energy
- (ब)दाब लगाने पर सुगमता से संपीड्य होने वाली संरचनाEasily compressible structure when pressure applied
- (क)खुले पात्रों में द्रवों की तरह प्रवाहित होने की क्षमताAbility to flow like liquids in open containers
- (ड)सामान्य परिस्थितियों में निश्चित आयतन और आकारDefinite volume and shape under normal conditions
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
सामान्य परिस्थितियों में निश्चित आयतन और आकार
Definite volume and shape under normal conditions
ठोस के कण प्रबल आकर्षण बलों से सघन रूप से बंधे होते हैं, इसलिए प्रत्येक ठोस का निश्चित आकार और निश्चित आयतन होता है तथा उसे संपीडित करना कठिन है।
Solid particles are closely packed with strong forces of attraction, so every solid has a definite shape and a definite volume and is hard to compress.
इसी पेपर के अन्य विषय
रोज़ मुफ़्त अभ्यास करें!
Daily 10, फ्लैशकार्ड, मॉक टेस्ट, स्ट्रीक और 45,000+ असली PYQ, हिंदी व अंग्रेज़ी में।
Google Play से डाउनलोड करें Telegram चैनल जुड़ें
Daily 10, फ्लैशकार्ड, मॉक टेस्ट, स्ट्रीक और 45,000+ असली PYQ, हिंदी व अंग्रेज़ी में।
Google Play से डाउनलोड करें Telegram चैनल जुड़ें