RRB ALP CBT-2 Electronics Mechanic · 28 Jul 2026 · Shift 2 — सामान्य विज्ञान
RRB Assistant Loco Pilot (ALP) · पिछले साल का प्रश्न पत्र
RRB ALP CBT-2 Electronics Mechanic · 28 Jul 2026 · Shift 2 — सामान्य विज्ञान (General Science) के 28 प्रश्न, सही उत्तर और हिंदी-अंग्रेज़ी स्पष्टीकरण सहित।
1.
किसी तार में निश्चित समय तक विद्युत धारा प्रवाहित होने पर उसमें उत्पन्न ऊष्मा की मात्रा को कौन-सा कारक बढ़ाता है?
Which factor increases the amount of heat produced in a wire when an electric current flows through it for a fixed time?
- (अ)तार की लंबाई घटानाDecreasing the length of the wire
- (ब)तार में धारा कम करनाReducing the current in the wire
- (क)तार को मोटा बनानाMaking the wire thicker
- (ड)तार का प्रतिरोध बढ़ानाIncreasing the resistance of the wire
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
तार का प्रतिरोध बढ़ाना
Increasing the resistance of the wire
जूल के नियम H = I²Rt से, दी गई धारा और समय के लिए अधिक प्रतिरोध से अधिक ऊष्मा बनती है। छोटा या मोटा तार प्रतिरोध घटाता है और कम धारा से ऊष्मा घटती है।
By Joule's law H = I²Rt, so for a given current and time, more resistance gives more heat. A shorter or thicker wire has less resistance, and less current reduces heat.
2.
घरेलू उपकरणों में विद्युत तारों पर आमतौर पर प्लास्टिक या रबर की परत क्यों चढ़ाई जाती है?
Why are electric wires in household appliances usually covered with plastic or rubber coating?
- (अ)तारों को भारी बनाने के लिएTo make the wires heavier
- (ब)रोधन (insulation) द्वारा विद्युत झटकों से बचाव के लिएTo prevent electric shocks by insulation
- (क)अधिक ऊष्मा उत्पन्न करने के लिएTo produce more heat
- (ड)धारा के प्रवाह को बढ़ाने के लिएTo increase the flow of current
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
रोधन (insulation) द्वारा विद्युत झटकों से बचाव के लिए
To prevent electric shocks by insulation
प्लास्टिक और रबर विद्युत के कुचालक हैं। तारों पर इनकी परत से तारों के आपस में या किसी व्यक्ति से छूने पर बिजली का झटका और शॉर्ट सर्किट नहीं होता।
Plastic and rubber are electrical insulators. Coating wires with them prevents electric shocks and short circuits when wires touch each other or a person.
3.
सामान्य नगरपालिका अपशिष्ट की तुलना में जैव-चिकित्सा अपशिष्ट के लिए विशेष प्रबंधन की आवश्यकता क्यों होती है?
Why does biomedical waste require special management compared to general municipal waste?
- (अ)इसमें संक्रामक कारक हो सकते हैं जो स्वास्थ्य जोखिम उत्पन्न करते हैंIt may contain infectious agents that pose health risks
- (ब)अन्य प्रकार के अपशिष्टों की तुलना में इसके पुनर्चक्रित होने की संभावना अधिक होती हैIt is more likely to be recycled than other types of waste
- (क)इसमें अधिक रासायनिक सामग्री होती हैं और यह सदैव विषाक्त होता हैIt contains more chemical material and is always toxic
- (ड)यह सदैव रेडियोधर्मी होता है और इसके लिए अत्यधिक परिरक्षण की आवश्यकता होती हैIt is always radioactive and requires heavy shielding
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
इसमें संक्रामक कारक हो सकते हैं जो स्वास्थ्य जोखिम उत्पन्न करते हैं
It may contain infectious agents that pose health risks
जैव-चिकित्सा अपशिष्ट (प्रयुक्त सिरिंज, पट्टियाँ, शारीरिक द्रव) में संक्रामक कारक हो सकते हैं जो रोग फैलाते हैं, अतः इसे अलग करके विशेष रूप से (जैसे ऑटोक्लेव या भस्मीकरण) उपचारित करना पड़ता है।
Biomedical waste (used syringes, dressings, body fluids) may carry infectious agents that can spread disease, so it must be segregated and treated separately, e.g. by autoclaving or incineration.
4.
निम्नलिखित में से कौन-सा, नगरपालिका ठोस अपशिष्ट का सर्वोत्तम उदाहरण है?
Which of the following is the best example of municipal solid waste?
- (अ)अस्पताल का बायोमेडिकल अपशिष्टBiomedical waste from a hospital
- (ब)औद्योगिक प्रक्रि या अपशिष्टIndustrial process waste
- (क)घरेलू रसोई का कचराHousehold kitchen waste
- (ड)खनन पुच्छनMining tailings
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
घरेलू रसोई का कचरा
Household kitchen waste
नगरपालिका ठोस अपशिष्ट घरों और दुकानों का रोज़मर्रा का कचरा है जिसे स्थानीय निकाय एकत्र करते हैं, जैसे घरेलू रसोई का कचरा। जैव-चिकित्सा, औद्योगिक और खनन अपशिष्ट अलग नियमों के अंतर्गत आते हैं।
Municipal solid waste is everyday waste from homes and shops collected by local bodies, such as household kitchen waste. Biomedical, industrial and mining wastes are handled under separate rules.
5.
घरेलू उपकरणों में विद्युत तारों पर सामान्यत: प्लास्टिक या रबर का आवरण क्यों चढ़ाया जाता है?
Why are electric wires in household appliances usually covered with a plastic or rubber coating?
- (अ)रोधन के द्वारा विद्युत आघात से सुरक्षा के लिएTo prevent electric shock through insulation
- (ब)विद्युत धारा के प्रवाह को बढ़ाने के लिएTo increase the flow of electric current
- (क)तारों को भारी बनाने के लिएTo make the wires heavier
- (ड)अधिक ऊष्मा उत्पन्न करने के लिएTo produce more heat
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
रोधन के द्वारा विद्युत आघात से सुरक्षा के लिए
To prevent electric shock through insulation
प्लास्टिक और रबर विद्युत के कुचालक हैं। तारों पर इनकी परत से तारों के आपस में या किसी व्यक्ति से छूने पर बिजली का झटका और शॉर्ट सर्किट नहीं होता।
Plastic and rubber are electrical insulators. Coating wires with them prevents electric shocks and short circuits when wires touch each other or a person.
6.
एक तकनीशियन को रूम हीटर के लिए फ्यूज तार का चयन करना है। विद्युत धारा के ऊष्मीय प्रभाव के आधार पर सुरक्षा के लिए किस गुण को सबसे महत्वपूर्ण माना जाना चाहिए?
A technician needs to select a fuse wire for a room heater. Which property should be considered most important for safety based on the heating effect of electric current?
- (अ)अत्यधिक धारा प्रवाहित होने पर परिपथ को तोड़ने के लिए फ्यूज तार का गलनांक कम होना चाहिए।The fuse wire must have a low melting point to break the circuit during excess current.
- (ब)स्थायित्व के लिए फ्यूज तार का गलनांक उच्च होना चाहिए।The fuse wire must have a high melting point for durability.
- (क)फ्यूज तार का प्रतिरोध उच्च और मोटाई अधिक होनी चाहिए ताकि वह पिघले नहीं।The fuse wire must have high resistance and be thick to prevent melting.
- (ड)कुशल शीतलन के लिए फ्यूज तार की सतह चमकदार होनी चाहिए।The fuse wire must have a shiny surface for efficient cooling.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
अत्यधिक धारा प्रवाहित होने पर परिपथ को तोड़ने के लिए फ्यूज तार का गलनांक कम होना चाहिए।
The fuse wire must have a low melting point to break the circuit during excess current.
फ्यूज़ ऊष्मीय प्रभाव पर काम करता है: धारा सीमा से अधिक होने पर तार गर्म होकर पिघलता है और परिपथ टूट जाता है। अतः इसका गलनांक कम होना चाहिए; उच्च गलनांक से इसका उद्देश्य विफल होगा।
A fuse works by the heating effect: when current exceeds its rating, the wire heats and melts, breaking the circuit. So it must have a low melting point; a high melting point would defeat its purpose.
7.
एक लड़का बालू (sand) ढोने के लिए एकपहिया ठेले का उपयोग करता है। पहिया, धुराग्र के रूप में कार्य करता है, बालू को ट्रे (tray) में रखा जाता है और लड़का हैंडल को उठाता है। इस व्यवस्था में, बालू ________ को निरूपित करती है।
A boy uses a wheelbarrow to carry sand. The wheel acts as the fulcrum, the sand is placed in the tray and the boy lifts the handles. In this arrangement, the sand represents the ________.
- (अ)भुजाarm
- (ब)लोडload
- (क)फलक्रमfulcrum
- (ड)आयासeffort
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
लोड
load
ठेला (व्हीलबैरो) द्वितीय श्रेणी का उत्तोलक है: एक सिरे पर आलंब (पहिया), हत्थों पर प्रयास और बीच में भार (रेत)। अतः रेत भार है।
A wheelbarrow is a class 2 lever: fulcrum (wheel) at one end, effort at the handles and the load (sand) in between. So the sand is the load.
8.
कमरे के तापमापी (room thermometer) को सामान्यतः दीवार पर ऊर्ध्वाधर क्यों लगाया जाता है?
Why is a room thermometer generally mounted vertically on a wall?
- (अ)यह बल्ब को कमरे की हवा के संपर्क में रखकर सटीक रीडिंग सुनिश्चित करता है।It ensures accurate reading by keeping the bulb exposed to room air.
- (ब)यह तापमापी को शरीर का तापमान अधिक तेजी से मापने में सहायता करता है।It helps the thermometer measure body temperature faster.
- (क)यह तापमापी को आसानी से टूटने से बचाता है।It protects the thermometer from breaking easily.
- (ड)यह तापमापी के अंदर द्रव को जमने से रोकता है।It prevents the liquid from freezing inside the thermometer.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
यह बल्ब को कमरे की हवा के संपर्क में रखकर सटीक रीडिंग सुनिश्चित करता है।
It ensures accurate reading by keeping the bulb exposed to room air.
थर्मामीटर को दीवार पर ऊर्ध्वाधर लगाने से उसका बल्ब कमरे की हवा के खुले संपर्क में रहता है (और पढ़ना आसान होता है), जिससे वह हवा का सही ताप दिखाता है।
Mounting the thermometer vertically on a wall keeps its bulb freely exposed to the surrounding room air (and easy to read), so it shows the true air temperature.
9.
एक प्रयोगशाला तापमापी का परास -10 डिग्री सेल्सियस से 110 डिग्री सेल्सियस है और इसमें 120 बराबर भाग हैं। यह तापमापी सबसे छोटा कितना मान पढ़ सकता है?
A laboratory thermometer has a range from -10 degrees Celsius to 110 degrees Celsius and 120 equal divisions. What is the smallest value that this thermometer can read?
- (अ)10 डिग्री सेल्सियस10 degrees Celsius
- (ब)2 डिग्री सेल्सियस2 degrees Celsius
- (क)0.5 डिग्री सेल्सियस0.5 degrees Celsius
- (ड)1 डिग्री सेल्सियस1 degree Celsius
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
1 डिग्री सेल्सियस
1 degree Celsius
परास = 110 − (−10) = 120 °C, 120 भागों में। अल्पतमांक = 120 ÷ 120 = 1 डिग्री सेल्सियस।
Range = 110 − (−10) = 120 °C over 120 divisions. Least count = 120 ÷ 120 = 1 degree Celsius.
10.
यदि किसी वस्तु की ऊँचाई दोगुनी कर दी जाए जबकि उसका द्रव्यमान स्थिर रहे, तो उसकी गुरुत्वीय स्थितिज ऊर्जा:
If the height of an object is doubled while its mass remains constant, its gravitational potential energy will be:
- (अ)आधी हो जाएगीhalved
- (ब)घटकर एक-चौथाई हो जाएगीdecreased to one-fourth
- (क)अपरिवर्तित रहेगीunchanged
- (ड)दोगुनी हो जाएगीdoubled
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
दोगुनी हो जाएगी
doubled
गुरुत्वीय स्थितिज ऊर्जा = mgh, अतः m और g स्थिर हों तो यह h के समानुपाती है। ऊँचाई दोगुनी करने पर स्थितिज ऊर्जा दोगुनी हो जाती है।
Gravitational potential energy = mgh, so with m and g fixed it is proportional to h. Doubling the height makes the potential energy doubled.
11.
निम्नलिखित में से कौन-सा विकल्प, CD के पूर्ण रूप और उस पर डेटा स्टोर करने की तकनीक को सर्वोत्तम रूप से दर्शाता है?
Which of the following correctly states the full form of CD and the technology used to store data on it?
- (अ)Compact Drive, Optical Storage (कॉम्पैक्ट ड्राइव, ऑप्टिकल स्टोरेज)Compact Drive, Optical Storage
- (ब)Compact Drive, Magnetic Storage (कॉम्पैक्ट ड्राइव, मैग्नेटिक स्टोरेज)Compact Drive, Magnetic Storage
- (क)Compact Disc, Optical Storage (कॉम्पैक्ट डिस्क, ऑप्टिकल स्टोरेज)Compact Disc, Optical Storage
- (ड)Compact Disc, Magnetic Storage (कॉम्पैक्ट डिस्क, मैग्नेटिक स्टोरेज)Compact Disc, Magnetic Storage
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
Compact Disc, Optical Storage (कॉम्पैक्ट डिस्क, ऑप्टिकल स्टोरेज)
Compact Disc, Optical Storage
CD का पूरा नाम Compact Disc है। इसमें डेटा सूक्ष्म गड्ढों (पिट्स) और समतल भागों के रूप में होता है जिन्हें लेज़र पढ़ता है, अर्थात ऑप्टिकल भंडारण; हार्ड डिस्क चुंबकीय भंडारण उपयोग करती है।
CD stands for Compact Disc. Data is stored as tiny pits and lands read by a laser beam, which is optical storage; hard disks use magnetic storage.
12.
शीतकालीन तापमान प्रतिलोमन (winter temperature inversion) के दौरान कौन-सा हस्तक्षेप धरातलीय प्रदूषक सांद्रता को सबसे प्रभावी ढंग से कम करता है?
Which intervention most effectively reduces ground-level pollutant concentrations during a winter temperature inversion?
- (अ)उत्सर्जन स्रोतों के निकट सतही तापमान बढ़ानाIncreasing surface temperatures near emission sources
- (ब)क्षैतिज प्रकीर्णन को न्यूनतम करने के लिए स्थानीय पवन चाल कम करनाReducing local wind speed to minimize horizontal dispersion
- (क)कृत्रिम विक्षोभ के माध्यम से ऊर्ध्वाधर वायु मिश्रण को बढ़ानाEnhancing vertical air mixing through artificial turbulence
- (ड)उत्सर्जन स्रोतों को प्रतिलोमन परतों से ऊपर उठानाElevating emission sources above inversion layers
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
कृत्रिम विक्षोभ के माध्यम से ऊर्ध्वाधर वायु मिश्रण को बढ़ाना
Enhancing vertical air mixing through artificial turbulence
सही उत्तर: कृत्रिम विक्षोभ के माध्यम से ऊर्ध्वाधर वायु मिश्रण को बढ़ाना (आधिकारिक उत्तर कुंजी)।
Correct answer: Enhancing vertical air mixing through artificial turbulence (official answer key).
13.
कुछ रासायनिक प्रशीतक-द्रव्यों को प्रतिबंधित करने से ओजोन परत को होने वाली क्षति में प्रभावी रूप से कमी क्यों आती है?
Why does banning certain chemical refrigerants effectively reduce damage to the ozone layer?
- (अ)प्रशीतक-द्रव्य ऐसे पदार्थ मुक्त करते हैं जो ओजोन विघटन को उत्प्रेरित करते हैं।Refrigerants release substances that catalyse ozone depletion.
- (ब)प्रशीतक-द्रव्यों में ऐसे कण होते हैं जो हानिकारक UV प्रकाश को अवशोषित करते हैं।Refrigerants contain particles that absorb harmful UV light.
- (क)प्रशीतक-द्रव्य, ऑक्सीजन उत्पादन को बढ़ाते हैं, जिससे ओजोन पुनःप्राप्ति में सहायता मिलती है।Refrigerants increase oxygen production, helping ozone recovery.
- (ड)प्रशीतक-द्रव्य, ग्रीनहाउस गैसें उत्सर्जित करते हैं जो समतापमंडल को गर्म करती हैं।Refrigerants emit greenhouse gases that warm the stratosphere.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
प्रशीतक-द्रव्य ऐसे पदार्थ मुक्त करते हैं जो ओजोन विघटन को उत्प्रेरित करते हैं।
Refrigerants release substances that catalyse ozone depletion.
CFC रेफ्रिजरेंट समतापमंडल में UV प्रकाश से टूटकर क्लोरीन परमाणु छोड़ते हैं, जो उत्प्रेरक की तरह अनेक ओज़ोन अणुओं को नष्ट करते हैं। इन पर प्रतिबंध (मॉन्ट्रियल प्रोटोकॉल) से यह रुकता है।
CFC refrigerants break down in UV light in the stratosphere and release chlorine atoms, which catalytically destroy many ozone molecules. Banning them (Montreal Protocol) stops this.
14.
एक रैंप का उपयोग एक बॉक्स को 2 m ऊंचे चबूतरे तक उठाने के लिए किया जाता है। आवश्यक आयास को कम करने के लिए, रैंप की लंबाई 4 m से बढ़ाकर 8 m कर दी जाती है। घर्षण को नगण्य मानते हुए, निम्नलिखित में से कौन-सा अपरिवर्तित रहता है?
A ramp is used to raise a box to a platform 2 m high. To reduce the effort required, the length of the ramp is increased from 4 m to 8 m. Assuming friction is negligible, which of the following remains unchanged?
- (अ)यांत्रिक लाभMechanical advantage
- (ब)अभीष्ट बलForce required
- (क)बॉक्स को ऊपर उठाने में किया गया कार्यWork done in lifting the box
- (ड)रैंप के अनुदिश तय की जाने वाली दूरीDistance moved along the ramp
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
बॉक्स को ऊपर उठाने में किया गया कार्य
Work done in lifting the box
घर्षण न हो तो किया गया कार्य = mgh, जो केवल 2 m ऊँचाई पर निर्भर है, अतः वह अपरिवर्तित रहता है। लंबा रैंप बल घटाता है तथा यांत्रिक लाभ और तय दूरी बढ़ाता है।
Without friction, work done = mgh, which depends only on the 2 m height, so it stays the same. A longer ramp lowers the force and raises the mechanical advantage and the distance moved.
15.
एक क्रेन 200 kg के लोड को 10 सेकंड में 15 मीटर की ऊंचाई तक उठाती है। गुरुत्वीय त्वरण को 10 m/s² और ऊर्जा हानि को नगण्य मानते हुए, इस क्रि या के दौरान क्रेन का शक्ति आउटपुट कितना होगा?
A crane lifts a 200 kg load to a height of 15 meters in 10 seconds. Assuming acceleration due to gravity is 10 m/s² and energy loss is negligible, what is the power output of the crane during this operation?
- (अ)1500 W
- (ब)1000 W
- (क)3000 W
- (ड)2000 W
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
3000 W
कार्य = mgh = 200 × 10 × 15 = 30,000 J। शक्ति = कार्य ÷ समय = 30,000 ÷ 10 = 3000 W।
Work = mgh = 200 × 10 × 15 = 30,000 J. Power = work ÷ time = 30,000 ÷ 10 = 3000 W.
16.
कौन-सा कथन इस बात का सर्वोत्तम वर्णन करता है कि किसी वस्तु का द्रव्यमान और चाल उसकी गतिज ऊर्जा को किस प्रकार प्रभावित करते हैं?
Which statement best describes how the mass and speed of an object affect its kinetic energy?
- (अ)कम द्रव्यमान और कम चाल वाली वस्तु की गतिज ऊर्जा अधिक होगी।An object with less mass and lower speed will have more kinetic energy.
- (ब)अधिक द्रव्यमान लेकिन कम चाल वाली वस्तु की गतिज ऊर्जा अधिक होगी।An object with greater mass but lower speed will have more kinetic energy.
- (क)समान द्रव्यमान लेकिन अधिक चाल वाली वस्तु की गतिज ऊर्जा कम होगी।An object with same mass but higher speed will have less kinetic energy.
- (ड)अधिक द्रव्यमान और अधिक चाल वाली वस्तु की गतिज ऊर्जा अधिक होगी।An object with greater mass and higher speed will have more kinetic energy.
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
अधिक द्रव्यमान और अधिक चाल वाली वस्तु की गतिज ऊर्जा अधिक होगी।
An object with greater mass and higher speed will have more kinetic energy.
गतिज ऊर्जा = ½mv², अतः यह द्रव्यमान और चाल दोनों के साथ (चाल के वर्ग के साथ) बढ़ती है। इसलिए अधिक द्रव्यमान और अधिक चाल वाली वस्तु की गतिज ऊर्जा अधिक होगी।
Kinetic energy = ½mv², so it increases with both mass and speed (with speed squared). An object with greater mass and higher speed therefore has more kinetic energy.
17.
कार्यशाला खराद (lathe) का उपयोग करने के बाद उसकी सफाई करते समय क्षति से बचने के लिए कौन-सा उपकरण सुरक्षा उपाय सर्वोत्तम है?
Which tool safety measure is best to avoid injury when cleaning a workshop lathe after use?
- (अ)खराद के चारों ओर संपीड़ित वायु से छीलन को उड़ानाBlowing the chips away with compressed air around the lathe
- (ब)धातु के छीलन को सीधे नग्न हाथों से पोंछनाWiping the metal chips directly with bare hands
- (क)खराद से धातु के छीलन को हटाने के लिए ब्रश का उपयोग करनाUsing a brush to remove metal chips from the lathe
- (ड)खराद से धातु की धूल हटाने के लिए रैग का उपयोग करनाUsing a rag to remove metal dust from the lathe
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
खराद से धातु के छीलन को हटाने के लिए ब्रश का उपयोग करना
Using a brush to remove metal chips from the lathe
धातु की छीलन (chips) नुकीली होती है, इसलिए उसे ब्रश से हटाना चाहिए। नंगे हाथ से कटने, कपड़े में चिप्स फँसने और संपीड़ित हवा से चिप्स आँखों में उड़ने का खतरा रहता है।
Metal chips are sharp, so they should be removed with a brush. Bare hands cause cuts, a rag can catch and drag chips, and compressed air throws chips into the eyes.
18.
किसी तार में एक निश्चित समय तक विद्युत धारा प्रवाहित होने पर उसमें उत्पन्न ऊष्मा की मात्रा में कौन- सा कारक वृद्धि करता है?
Which factor increases the amount of heat produced in a wire when an electric current flows through it for a certain time?
- (अ)तार की लंबाई कम करनाDecreasing the length of the wire
- (ब)तार में धारा को कम करनाDecreasing the current in the wire
- (क)तार को मोटा बनानाMaking the wire thicker
- (ड)तार के प्रतिरोध में वृद्धि करनाIncreasing the resistance of the wire
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
तार के प्रतिरोध में वृद्धि करना
Increasing the resistance of the wire
जूल के नियम से ऊष्मा H = I²Rt। समान धारा और समय के लिए प्रतिरोध बढ़ाने पर ऊष्मा बढ़ती है। छोटा या मोटा तार प्रतिरोध घटाता है और कम धारा से ऊष्मा कम होती है।
By Joule's law, heat H = I²Rt. For the same current and time, heat increases when resistance increases. A shorter or thicker wire has lower resistance, and lower current gives less heat.
19.
कुछ रासायनिक प्रशीतकों (refrigerants) पर प्रतिबंध लगाने से ओजोन परत को होने वाली क्षति प्रभावी रूप से क्यों कम होती है?
Why does restricting certain chemical refrigerants effectively reduce damage to the ozone layer?
- (अ)प्रशीतक ऐसे पदार्थ मुक्त करते हैं जो ओजोन के विघटन को उत्प्रेरित करते हैं।Refrigerants release substances that catalyze ozone breakdown.
- (ब)प्रशीतक ऑक्सीजन उत्पादन को बढ़ाते हैं, जिससे ओजोन के पुनः निर्माण में सहायता मिलती है।Refrigerants increase oxygen production, supporting ozone recovery.
- (क)प्रशीतकों में ऐसे कण होते हैं जो हानिकारक UV प्रकाश को अवशोषित करते हैं।Refrigerants contain particles that absorb harmful UV light.
- (ड)प्रशीतक ऐसी ग्रीनहाउस गैसें उत्सर्जित करते हैं जो समतापमंडल को गर्म करती हैं।Refrigerants emit greenhouse gases that warm the stratosphere.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
प्रशीतक ऐसे पदार्थ मुक्त करते हैं जो ओजोन के विघटन को उत्प्रेरित करते हैं।
Refrigerants release substances that catalyze ozone breakdown.
CFC प्रशीतक समतापमंडल में क्लोरीन परमाणु मुक्त करते हैं, जो उत्प्रेरक की तरह ओज़ोन अणुओं को तोड़ते हैं। इन पर रोक लगाने से ओज़ोन क्षरण रुकता है।
CFC refrigerants release chlorine atoms in the stratosphere, which catalytically break down ozone molecules. Restricting them stops this ozone depletion.
20.
एक तकनीशियन को रूम हीटर के लिए फ्यूज तार का चयन करना है। विद्युत धारा के तापन प्रभाव के आधार पर सुरक्षा के लिए किस गुणधर्म को सबसे महत्वपूर्ण माना जाना चाहिए?
A technician has to select a fuse wire for a room heater. Which property should be considered most important for safety, based on the heating effect of electric current?
- (अ)अतिरिक्त धारा के दौरान परिपथ को विच्छेदित करने के लिए फ्यूज तार का गलनांक निम्न होना चाहिए।The melting point of the fuse wire should be low so as to break the circuit during excess current.
- (ब)दक्ष शीतलन के लिए फ्यूज तार का पृष्ठ चमकदार होना चाहिए।The surface of the fuse wire should be shiny for efficient cooling.
- (क)पिघलने से रोकने के लिए फ्यूज तार को उच्च प्रतिरोध वाला और मोटा होना चाहिए।The fuse wire should have high resistance and be thick to prevent melting.
- (ड)फ्यूज तार के चिरस्थायित्व के लिए उच्च गलनांक होना चाहिए।The fuse wire should have a high melting point for durability.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
अतिरिक्त धारा के दौरान परिपथ को विच्छेदित करने के लिए फ्यूज तार का गलनांक निम्न होना चाहिए।
The melting point of the fuse wire should be low so as to break the circuit during excess current.
फ्यूज़ विद्युत धारा के ऊष्मीय प्रभाव पर काम करता है: उसके तार का गलनांक कम होता है, जिससे अधिक धारा बहने पर वह जल्दी पिघलकर परिपथ तोड़ देता है और हीटर व वायरिंग की रक्षा करता है।
A fuse works on the heating effect: its wire has a low melting point so it melts quickly when excess current flows and breaks the circuit, protecting the heater and wiring.
21.
उपयोग के बाद वर्कशॉप लेथ (lathe) की सफाई करते समय चोट से बचाव के लिए कौन-सा औज़ार सुरक्षा उपाय सर्वोत्तम है?
Which tool safety measure best prevents injuries when cleaning a workshop lathe after use?
- (अ)लेथ के आसपास संपीड़ित वायु से छीलन (chips) को उड़ानाBlowing chips away with compressed air around the lathe
- (ब)धातु की छीलन को सीधे नंगे हाथों से पोंछनाWiping metal chips using bare hands directly
- (क)लेथ से धातु की छीलन हटाने के लिए ब्रश का उपयोग करनाUsing a brush to remove metal chips from the lathe
- (ड)लेथ से धातु की धूल हटाने के लिए कपड़े (rag) का उपयोग करनाUsing a rag to remove metal dust from the lathe
उत्तर व स्पष्टीकरण देखें
उत्तर: (क)
लेथ से धातु की छीलन हटाने के लिए ब्रश का उपयोग करना
Using a brush to remove metal chips from the lathe
लेथ की छीलन नुकीली और गर्म होती है, इसलिए उसे ब्रश से साफ़ करना चाहिए। नंगे हाथ से कट लगते हैं, कपड़ा फँस सकता है और संपीड़ित हवा से चिप्स आँखों में जा सकते हैं।
Lathe chips are sharp and hot, so they should be cleared with a brush. Bare hands cause cuts, rags can snag, and compressed air blows chips into the eyes.
22.
एक अंतरिक्ष यात्री का पृथ्वी पर भार 600 N है। चंद्रमा मिशन के दौरान, वह चंद्रमा पर अपना वजन मापने के लिए एक प्रयोग करती है। कौन-सा मान, चंद्रमा पर उसके अनुमानित भार के सबसे सन्निकट है, और क्यों?
An astronaut's weight on Earth is 600 N. During a Moon mission, she performs an experiment to measure her weight on the Moon. Which value is closest to her expected weight on the Moon, and why?
- (अ)200 N, क्योंकि चंद्रमा का गुरुत्व, पृथ्वी के गुरूत्व का लगभग एक-तिहाई होता है।200 N, because the Moon's gravity is about one-third of the Earth's gravity.
- (ब)100 N, क्योंकि चंद्रमा का गुरूत्व, पृथ्वी के गुरूत्व का लगभग होता है।100 N, because the Moon's gravity is approximately that of the Earth's gravity.
- (क)300 N, क्योंकि चंद्रमा का गुरुत्व, पृथ्वी के गुरुत्व का लगभग आधा होता है।300 N, because the Moon's gravity is about half of the Earth's gravity.
- (ड)600 N, क्योंकि चंद्रमा पर किसी भी व्यक्ति का भार अपरिवर्तित रहता है।600 N, because a person's weight remains unchanged on the Moon.
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
100 N, क्योंकि चंद्रमा का गुरूत्व, पृथ्वी के गुरूत्व का लगभग होता है।
100 N, because the Moon's gravity is approximately that of the Earth's gravity.
सही उत्तर: 100 N, क्योंकि चंद्रमा का गुरूत्व, पृथ्वी के गुरूत्व का लगभग होता है। (आधिकारिक उत्तर कुंजी)।
Correct answer: 100 N, because the Moon's gravity is approximately that of the Earth's gravity. (official answer key).
23.
एक रैंप का उपयोग किसी बक्से को 2 m ऊँचे चबूतरे तक उठाने के लिए किया जाता है। आवश्यक प्रयास को कम करने के लिए, रैंप की लंबाई 4 m से बढ़ाकर 8 m कर दी जाती है। घर्षण को नगण्य मानते हुए, क्या अपरिवर्तित रहता है?
A ramp is used to lift a box to a platform 2 m high. To reduce the effort required, the ramp length is increased from 4 m to 8 m. Assuming negligible friction, what remains unchanged?
- (अ)रैंप के अनुदिश तय की गई दूरीThe distance moved along the ramp
- (ब)बक्से को ऊपर उठाने में किया गया कार्यThe work done in raising the box
- (क)आवश्यक बलThe force required
- (ड)यांत्रिक लाभThe mechanical advantage
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
बक्से को ऊपर उठाने में किया गया कार्य
The work done in raising the box
घर्षण न होने पर किया गया कार्य = mgh, जो केवल ऊँचाई (2 m) और भार पर निर्भर है। लंबा रैम्प बल घटाता और यांत्रिक लाभ बढ़ाता है, पर किया गया कार्य वही रहता है।
Without friction, work done = mgh, which depends only on the height (2 m) and weight. A longer ramp lowers the force and raises the mechanical advantage, but the work done stays the same.
24.
सीमित स्थानों (confined spaces) में वायुवाहित रासायनिक कणों से संबंधित कार्यों के लिए किस प्रकार का व्यक्तिगत सुरक्षा उपकरण सबसे उपयुक्त है?
Which type of personal protective equipment is most suitable for tasks involving airborne chemical particles in confined spaces?
- (अ)अग्निरोधी सूट के साथ शरीर की सुरक्षाBody protection with flame-retardant suits
- (ब)रसायन-प्रतिरोधी दस्तानों के उपयोग से हाथों की सुरक्षाHand protection using chemical-resistant gloves
- (क)औद्योगिक श्रेणी के हार्ड हैट के साथ सिर की सुरक्षाHead protection with industrial-grade hard hats
- (ड)हाफ-फेस मास्क जैसे श्वसन सुरक्षा उपकरणRespiratory protection devices such as half-face masks
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
हाफ-फेस मास्क जैसे श्वसन सुरक्षा उपकरण
Respiratory protection devices such as half-face masks
हवा में उपस्थित रासायनिक कण साँस के माध्यम से शरीर में जाते हैं, इसलिए विशेषकर सीमित स्थानों में हाफ-फेस मास्क जैसे श्वसन सुरक्षा उपकरण आवश्यक हैं।
Airborne chemical particles enter through breathing, so respiratory protection such as half-face respirator masks is needed, especially in confined spaces.
25.
यदि किसी वस्तु का द्रव्यमान नियत रखते हुए उसकी ऊँचाई को दोगुना कर दिया जाए, तो उसकी गुरुत्वीय स्थितिज ऊर्जा ______________।
If the height of an object is doubled while keeping its mass constant, its gravitational potential energy will ______________.
- (अ)अपरिवर्तित रहेगीremain unchanged
- (ब)घटकर एक-चौथाईdecrease to one-fourth
- (क)आधी हो जाएगीbe halved
- (ड)दोगुनी हो जाएगीbe doubled
उत्तर व स्पष्टीकरण देखें
उत्तर: (ड)
दोगुनी हो जाएगी
be doubled
गुरुत्वीय स्थितिज ऊर्जा PE = mgh। m और g स्थिर हों तो PE ऊँचाई h के समानुपाती है, अतः ऊँचाई दोगुनी करने पर स्थितिज ऊर्जा दोगुनी हो जाती है।
Gravitational potential energy PE = mgh. With m and g constant, PE is directly proportional to h, so doubling the height doubles the potential energy.
26.
एक अंतरिक्ष यात्री का पृथ्वी पर भार 600 N है। चंद्रमा मिशन के दौरान, वह चंद्रमा पर अपना भार मापने के लिए एक प्रयोग करती है। कौन-सा मान चंद्रमा पर उसके अपेक्षित भार के सबसे निकट है, और क्यों?
An astronaut weighs 600 N on Earth. During a moon mission, she performs an experiment to measure her weight on the moon. Which value is closest to her expected weight on the moon, and why?
- (अ)100 N, क्योंकि चंद्रमा का गुरुत्व पृथ्वी के गुरुत्व का लगभग छठा भाग होता है।100 N, because the Moon's gravity is about one-sixth of Earth's.
- (ब)200 N, क्योंकि चंद्रमा का गुरुत्व पृथ्वी के गुरुत्व का लगभग एक-तिहाई होता है।200 N, because the Moon's gravity is about one-third of Earth's.
- (क)600 N, क्योंकि चंद्रमा पर किसी व्यक्ति का भार अपरिवर्तित रहता है।600 N, because a person's weight remains unchanged on the Moon.
- (ड)300 N, क्योंकि चंद्रमा का गुरुत्व पृथ्वी के गुरुत्व का लगभग आधा होता है।300 N, because the Moon's gravity is about one-half of Earth's.
उत्तर व स्पष्टीकरण देखें
उत्तर: (अ)
100 N, क्योंकि चंद्रमा का गुरुत्व पृथ्वी के गुरुत्व का लगभग छठा भाग होता है।
100 N, because the Moon's gravity is about one-sixth of Earth's.
चंद्रमा का गुरुत्व पृथ्वी का लगभग छठा भाग है, अतः वहाँ उसका भार ≈ 600 ÷ 6 = 100 N होगा। द्रव्यमान वही रहता है, पर भार बदल जाता है।
The Moon's gravity is about one-sixth of Earth's, so her weight there ≈ 600 ÷ 6 = 100 N. Her mass stays the same but weight changes.
27.
कौन-सा कथन किसी वस्तु के द्रव्यमान और चाल द्वारा उसकी गतिज ऊर्जा पर पड़ने वाले प्रभाव का सटीक वर्णन करता है?
Which statement accurately describes the effect of the mass and speed of an object on its kinetic energy?
- (अ)समान द्रव्यमान लेकिन उच्चतर चाल वाली वस्तु में गतिज ऊर्जा कम होगी।An object with the same mass but a higher speed will have less kinetic energy.
- (ब)अधिक द्रव्यमान और उच्चतर चाल वाली वस्तु में गतिज ऊर्जा अधिक होगी।An object with greater mass and a higher speed will have more kinetic energy.
- (क)अधिक द्रव्यमान लेकिन निम्नतर चाल वाली वस्तु में गतिज ऊर्जा अधिक होगी।An object with greater mass but a lower speed will have more kinetic energy.
- (ड)कम द्रव्यमान और निम्नतर चाल वाली वस्तु में गतिज ऊर्जा अधिक होगी।An object with lesser mass and a lower speed will have more kinetic energy.
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
अधिक द्रव्यमान और उच्चतर चाल वाली वस्तु में गतिज ऊर्जा अधिक होगी।
An object with greater mass and a higher speed will have more kinetic energy.
गतिज ऊर्जा KE = ½mv², अतः यह द्रव्यमान और चाल दोनों के साथ बढ़ती है। इसलिए अधिक द्रव्यमान और अधिक चाल वाली वस्तु की गतिज ऊर्जा अधिक होती है।
Kinetic energy KE = ½mv², so it increases with both mass and speed. An object with greater mass and higher speed therefore has more kinetic energy.
28.
एक लड़का रेत ढोने के लिए एकपहिया ठेले (wheelbarrow) का उपयोग करता है। पहिया धुराग्र (pivot) के रूप में कार्य करता है, रेत को ट्रे में रखा जाता है और लड़का हैंडल को उठाता है। इस व्यवस्था में, रेत ________ को निरूपित करती है।
A boy uses a wheelbarrow to carry sand. The wheel acts as the pivot, the sand is placed in the tray, and the boy lifts the handles. In this arrangement, the sand represents ________.
- (अ)भुजाArm
- (ब)भार (Load)Load
- (क)आलंब (Fulcrum)Fulcrum
- (ड)आयास (Effort)Effort
उत्तर व स्पष्टीकरण देखें
उत्तर: (ब)
भार (Load)
Load
पहिया-गाड़ी (द्वितीय श्रेणी उत्तोलक) में पहिया आलंब है, हैंडल पर लड़के का बल प्रयास है, और बीच में ट्रे में रखी रेत भार है।
In a wheelbarrow (class 2 lever) the wheel is the fulcrum, the boy's lift at the handles is the effort, and the sand in the tray between them is the load.
इसी पेपर के अन्य विषय
रोज़ मुफ़्त अभ्यास करें!
Daily 10, फ्लैशकार्ड, मॉक टेस्ट, स्ट्रीक और 45,000+ असली PYQ, हिंदी व अंग्रेज़ी में।
Google Play से डाउनलोड करें Telegram चैनल जुड़ें
Daily 10, फ्लैशकार्ड, मॉक टेस्ट, स्ट्रीक और 45,000+ असली PYQ, हिंदी व अंग्रेज़ी में।
Google Play से डाउनलोड करें Telegram चैनल जुड़ें